sku
BCNA180W2FA
supplier
Brook Crompton
specs link
Click here

0.18Kw (1/4hp) 2Pole 3Phase WDA63 Aluminium

Full Load Speed:2810rpm, Full Load Current@400V:0.62amps
Shaft size:11mm, Weight:5.4kg

Back to Top

sku
BCNA180W4FA
supplier
Brook Crompton
specs link
Click here

0.18Kw (1/4hp) 4Pole 3Phase WDA63 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1370rpm, Full Load Current@400V:0.64amps
Shaft size:11mm, Weight:7kg, Slide Rails to suit:M0809

Back to Top

sku
BCNA180W6FA
supplier
Brook Crompton
specs link
Click here

0.18Kw (1/4hp) 6Pole 3Phase WDA71 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:910rpm, Full Load Current@400V:0.75amps
Shaft size:14mm, Weight:7kg

Back to Top

sku
BCNA250W2FA
supplier
Brook Crompton
specs link
Click here

0.25Kw (1/3hp) 2Pole 3phase WDA63 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2810rpm, Full Load Current@400V:0.72amps
Shaft size:11mm, Weight:5.4kg

Back to Top

sku
BCNA250W4FA
supplier
Brook Crompton
specs link
Click here

0.25Kw (1/3hp) 4Pole 3phase WDA71 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1400rpm, Full Load Current@400V:0.80amps
Shaft size:14mm, Weight:7kg, Slide Rails to suit:M0809

Back to Top

sku
BCNA250W6FA
supplier
Brook Crompton
specs link
Click here

0.25Kw (1/3hp) 6Pole 3phase WDA71 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:920rpm, Full Load Current@400V:1.06amps
Shaft size:14mm, Weight:7kg

Back to Top

W Series WDA71-80
sku
BCNA250W8FA
supplier
Brook Crompton
specs link
Click here

0.25kw (1/3hp) 8Pole 3Phase WD80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:695rpm, Full Load Current@400V:1.2amps
Shaft size:19mm, Weight:14kg
Slide Rails to suit:M0809

Back to Top

sku
BCNA370W2FA
supplier
Brook Crompton
specs link
Click here

0.37Kw (1/2hp) 2Pole 3phase WDA71 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2815rpm, Full Load Current@400V:0.88amps
Shaft size:14mm, Weight:7kg, Slide Rails to suit:M0809

Back to Top

sku
BCNA370W4FA
supplier
Brook Crompton
specs link
Click here

0.37Kw (1/2hp) 4Pole 3phase WDA71 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1410rpm, Full Load Current@400V:1.11amps
Shaft size:14mm, Weight:7kg, Slide Rails to suit:M0809

Back to Top

W Series WDA71-80
sku
BCNA370W6FA
supplier
Brook Crompton
specs link
Click here

0.37Kw (1/2hp) 6Pole 3phase WDA80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:920rpm, Full Load Current@400V:1.27amps
Shaft size:19mm, Weight:14kg, Slide Rails to suit:M0809

Back to Top

W Series WDA71-80 V2
sku
BCNA370W8FA
supplier
Brook Crompton
specs link
Click here

0.37kw (1/2hp) 8Pole 3Phase WD90S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:700rpm, Full Load Current@400V:1.63amps
Shaft size:24m, Weight:15kg
Slide Rails to suit:M0809

Back to Top

sku
BCNA550W2FA
supplier
Brook Crompton
specs link
Click here

0.55Kw (3/4hp) 2Pole 3phase WDA71 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2820rpm, Full Load Current@400V:1.23amps
Shaft size:14mm, Weight:7kg, Slide Rails to suit:M0809

Back to Top

W Series WDA71-80
sku
BCNA550W4FA
supplier
Brook Crompton
specs link
Click here

0.55Kw (3/4hp) 4Pole 3phase WDA80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1410rpm, Full Load Current@400V:1.58amps
Shaft size:19mm, Weight:14kg, Slide Rails to suit:M0809

Back to Top

W Series WDA71-80
sku
BCNA550W6FA
supplier
Brook Crompton
specs link
Click here

0.55Kw (3/4hp) 6Pole 3phase WDA80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:920rpm, Full Load Current@400V:1.77amps
Shaft size:19mm, Weight:14kg, Slide Rails to suit:M0809

Back to Top

W Series WDA71-80
sku
BCNA550W8FA
supplier
Brook Crompton
specs link
Click here

0.55kw (3/4hp) 8Pole 3Phase WD90L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:690rpm, Full Load Current@400V:2.15amps
Shaft size:24mm, Weight:17kg
Slide Rails to suit:M0809

Back to Top

W Series WDA71-80
sku
BCNA750W2FA
supplier
Brook Crompton
specs link
Click here

0.75Kw (1HP) 2Pole 3Phase WDA80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2823rpm, Full Load Current@400V:1.53amps
Efficiency@Full Load:80.33%, Shaft size:19mm, Weight:14kg,
Slide Rails to suit:M0809

Back to Top

W Series WDA71-80
sku
BCNA750W4FA
supplier
Brook Crompton
specs link
Click here

0.75Kw (1HP) 4Pole 3Phase WDA80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1413rpm, Full Load Current@400V:1.68amps
Efficiency@Full Load:82.5%, Shaft size:19mm, Weight:14kg,
Slide Rails to suit:M0809

Back to Top

W Series WDA90-112 V2
sku
BCNA750W6FA
supplier
Brook Crompton
specs link
Click here

0.75Kw (1hp) 6Pole 3Phase WDA90S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:920rpm, Full Load Current@400V:1.95amps
Efficiency@Full Load:78.56%, Shaft size:24mm, Weight:15kg
Slide Rails to suit:M0809

Back to Top

W Series WDA90-112
sku
BCNA750W8FA
supplier
Brook Crompton
specs link
Click here

0.75kw (1hp) 8Pole 3Phase WD100L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:704rpm, Full Load Current@400V:2.51amps
Efficiency@Full Load:75.11%, Shaft size:28mm, Weight:27kg
Slide Rails to suit:M1013

Back to Top

W Series WDA71-80
sku
BCNB110W2FA
supplier
Brook Crompton
specs link
Click here

1.1Kw (1 1/2hp) 2Pole 3phase WDA80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2870rpm, Full Load Current@400V:2.38amps
Efficiency@Full Load:82.82%, Shaft size:19mm, Weight:14kg,
Slide Rails to suit:M0809

Back to Top

sku
BCNB110W4FA
supplier
Brook Crompton
specs link
Click here

1.1Kw (1 1/2hp) 4Pole 3phase WDA90S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1415rpm, Full Load Current@400V:2.43amps
Efficiency@Full Load:83.68%, Shaft size:24mm, Weight:15kg,
Slide Rails to suit:M0809

Back to Top

W Series WDA71-80
sku
BCNB110W6FA
supplier
Brook Crompton
specs link
Click here

1.1Kw (1 1/2hp) 6Pole 3phase WDA90L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:940rpm, Full Load Current@400V:2.65amps
Efficiency@Full Load:79.69%, Shaft size:24mm, Weight:17kg
Slide Rails to suit:M0809

Back to Top

W Series WDA90-112
sku
BCNB110W8FA
supplier
Brook Crompton
specs link
Click here

1.1kw (1 1/2hp) 8Pole 3Phase WD100L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:692rpm, Full Load Current@400V:3.36amps
Efficiency@Full Load:77.92%, Shaft size:28mm, Weight:27kg
Slide Rails to suit:M1013

Back to Top

W Series WDA90-112 V2
sku
BCNB150W2FA
supplier
Brook Crompton
specs link
Click here

1.5Kw (2hp) 2Pole 3phase WDA90S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2832rpm, Full Load Current@400V:3.1amps
Efficiency@Full Load:84.1%, Shaft size:24mm, Weight:15kg,
Slide Rails to suit:M0809

Back to Top

W Series WDA90-112
sku
BCNB150W4FA
supplier
Brook Crompton
specs link
Click here

1.5Kw (2hp) 4Pole 3phase WDA90L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1414rpm, Full Load Current@400V:3amps
Efficiency@Full Load:84.91%, Shaft size:24mm, Weight:17kg,
Slide Rails to suit:M0809

Back to Top

W Series WDA90-112
sku
BCNB150W6FA
supplier
Brook Crompton
specs link
Click here

1.5Kw (2hp) 6Pole 3phase WDA100L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:937rpm, Full Load Current@400V:3.65amps
Efficiency@Full Load:81.65%, Shaft size:28mm, Weight:27kg
Slide Rails to suit:M1013

Back to Top

W Series WDA90-112 V2
sku
BCNB150W8FA
supplier
Brook Crompton
specs link
Click here

1.5kw (2hp) 8Pole 3Phase WD112M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:690rpm, Full Load Current@400V:3.81amps
Efficiency@Full Load:78%, Shaft size:28mm, Weight:33kg
Slide Rails to suit:M1013

Back to Top

W Series WDA90-112
sku
BCNB220W2FA
supplier
Brook Crompton
specs link
Click here

2.2Kw (3hp) 2Pole 3phase WDA90L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2834rpm, Full Load Current@400V:4.4amps
Efficiency@Full Load:85.69%, Shaft size:24mm, Weight:17kg,
Slide Rails to suit:M0809

Back to Top

W Series WDA90-112
sku
BCNB220W4FA
supplier
Brook Crompton
specs link
Click here

2.2Kw (3hp) 4Pole 3phase WDA100L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1439rpm, Full Load Current@400V:4.3amps
Efficiency@Full Load:86.68%, Shaft size:28mm, Weight:27kg,
Slide Rails to suit:M1013

Back to Top

W Series WDA90-112 V2
sku
BCNB220W6FA
supplier
Brook Crompton
specs link
Click here

2.2Kw (3hp) 6Pole 3phase WDA112M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:950rpm, Full Load Current@400V:5.05amps
Efficiency@Full Load:84.79%, Shaft size:28mm, Weight:33kg
Slide Rails to suit:M1013

Back to Top

W Series WDA132-160
sku
BCNB220W8FA
supplier
Brook Crompton
specs link
Click here

2.2Kw (3hp) 8Pole 3Phase WD132S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:720rpm, Full Load Current@400V:6.1amps
Efficiency@Full Load:84.35%, Shaft size:38mm, Weight:50kg
Slide Rails to suit:M1013

Back to Top

W Series WDA90-112
sku
BCNB300W2FA
supplier
Brook Crompton
specs link
Click here

3Kw (4hp) 2Pole 3phase WDA100L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2890rpm, Full Load Current@400V:5.48amps
Efficiency@Full Load:86.84%, Shaft size:28mm, Weight:27kg,
Slide Rails to suit:M1013

Back to Top

W Series WDA90-112
sku
BCNB300W4FA
supplier
Brook Crompton
specs link
Click here

3Kw (4hp) 4Pole 3phase WDA100L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1415rpm, Full Load Current@400V:6amps
Efficiency@Full Load:87.74%, Shaft size:28mm, Weight:27kg,
Slide Rails to suit:M1013

Back to Top

W Series WDA132-160 V2
sku
BCNB300W6FA
supplier
Brook Crompton
specs link
Click here

3Kw (4hp) 6Pole 3phase WDA132S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:960rpm, Full Load Current@400V:6.6amps
Efficiency@Full Load:85.66%, Shaft size:38mm, Weight:50kg
Slide Rails to suit:M1013

Back to Top

W Series WDA132-160 V2
sku
BCNB300W8FA
supplier
Brook Crompton
specs link
Click here

3Kw (4hp) 8Pole 3Phase WD132M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:720rpm, Full Load Current@400V:7.8amps
Efficiency@Full Load:84.96%, Shaft size:38mm, Weight:56kg
Slide Rails to suit:M1013

Back to Top

W Series WDA90-112 V2
sku
BCNB400W2FA
supplier
Brook Crompton
specs link
Click here

4Kw (5 1/2hp) 2Pole 3phase WDA112M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2880rpm, Full Load Current@400V:7.3amps
Efficiency@Full Load:87.67%, Shaft size:28mm, Weight:33kg,
Slide Rails to suit:M1013

Back to Top

W Series WDA90-112 V2
sku
BCNB400W4FA
supplier
Brook Crompton
specs link
Click here

4Kw (5 1/2hp) 4Pole 3phase WDA112M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1447rpm, Full Load Current@400V:7.8amps
Efficiency@Full Load:88.76%, Shaft size:28mm, Weight:33kg,
Slide Rails to suit:M1013

Back to Top

W Series WDA132-160 V2
sku
BCNB400W6FA
supplier
Brook Crompton
specs link
Click here

4Kw (5 1/2hp) 6Pole 3phase WDA132M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:958rpm, Full Load Current@400V:9.05amps
Efficiency@Full Load:88.09%, Shaft size:38mm, Weight:56kg
Slide Rails to suit:M1013

Back to Top

W Series WDA132-160 V2
sku
BCNB400W8FA
supplier
Brook Crompton
specs link
Click here

4Kw (5 1/2hp) 8Pole 3Phase WD160M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:725rpm, Full Load Current@400V:9.87amps
Efficiency@Full Load:86%, Shaft size:42mm, Weight:100kg
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160 V2
sku
BCNB550W2FA
supplier
Brook Crompton
specs link
Click here

5.5Kw (7 1/2hp) 2Pole 3phase WDA132S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2912rpm, Full Load Current@400V:9.71amps
Efficiency@Full Load:89.97%, Shaft size:38mm, Weight:50kg,
Slide Rails to suit:M1013

Back to Top

W Series WDA132-160 V2
sku
BCNB550W4FA
supplier
Brook Crompton
specs link
Click here

5.5Kw (7 1/2hp) 4Pole 3phase WDA132S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1453rpm, Full Load Current@400V:10.59amps
Efficiency@Full Load:89.22%, Shaft size:38mm, Weight:50kg,
Slide Rails to suit:M1013

Back to Top

W Series WDA132-160 V2
sku
BCNB550W6FA
supplier
Brook Crompton
specs link
Click here

5.5Kw (7 1/2hp) 6Pole 3phase WDA132M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:958rpm, Full Load Current@400V:11.63amps
Efficiency@Full Load:88.82%, Shaft size:38mm, Weight:56kg
Slide Rails to suit:M1013

Back to Top

W Series WDA132-160 V2
sku
BCNB550W8FA
supplier
Brook Crompton
specs link
Click here

5.5Kw (7 1/2hp) 8Pole 3Phase WD160M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:729rpm, Full Load Current@400V:13.22amps
Efficiency@Full Load:87%, Shaft size:42mm, Weight:100kg
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160 V2
sku
BCNB750W2FA
supplier
Brook Crompton
specs link
Click here

7.5Kw (10hp) 2Pole 3phase WDA132S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2880rpm, Full Load Current@400V:13.3amps
Efficiency@Full Load:89.75%, Shaft size:38mm, Weight:50kg,
Slide Rails to suit:M1013

Back to Top

W Series WDA132-160 V2
sku
BCNB750W4FA
supplier
Brook Crompton
specs link
Click here

7.5Kw (10hp) 4Pole 3phase WDA132M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1449rpm, Full Load Current@400V:13.83amps
Efficiency@Full Load:90.27%, Shaft size:38mm, Weight:56kg,
Slide Rails to suit:M1013

Back to Top

W Series WDA132-160 V2
sku
BCNB750W6FA
supplier
Brook Crompton
specs link
Click here

7.5Kw (10hp) 6Pole 3phase WDA160M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:979rpm, Full Load Current@400V:16.53amps
Efficiency@Full Load:88.78%, Shaft size:42mm, Weight:100kg
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160
sku
BCNB750W8FA
supplier
Brook Crompton
specs link
Click here

7.5Kw (10hp) 8Pole 3Phase WD160L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:725rpm, Full Load Current@400V:17.3amps
Efficiency@Full Load:88%, Shaft size:42mm, Weight:106kg
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160 V2
sku
BCNB930W2FA
supplier
Brook Crompton
specs link
Click here

9.3Kw (12 1/2hp) 2Pole 3phase WDA132M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2894rpm, Full Load Current@400V:16.6amps
Efficiency@Full Load:89.86%, Shaft size:38mm, Weight:56kg,
Slide Rails to suit:M1013

Back to Top

W Series WDA132-160 V2
sku
BCNC110W2FA
supplier
Brook Crompton
specs link
Click here

11Kw (15hp) 2Pole 3phase WDA160M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2950rpm, Full Load Current@400V:19.6amps
Efficiency@Full Load:91%, Shaft size:42mm, Weight:100kg,
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160 V2
sku
BCNC110W4FA
supplier
Brook Crompton
specs link
Click here

11Kw (15hp) 4Pole 3phase WDA160M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1470rpm, Full Load Current@400V:20.9amps
Efficiency@Full Load:91.5%, Shaft size:42mm, Weight:100kg
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160
sku
BCNC110W6FA
supplier
Brook Crompton
specs link
Click here

11Kw (15hp) 6Pole 3phase WDA160L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:982rpm, Full Load Current@400V:22.7amps
Efficiency@Full Load:91%, Shaft size:42mm, Weight:106kg
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160 V2
sku
BCNC150W2FA
supplier
Brook Crompton
specs link
Click here

15Kw (20hp) 2Pole 3phase WDA160M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2940rpm, Full Load Current@400V:26.0amps
Efficiency@Full Load:91.5%, Shaft size:42mm, Weight:100kg,
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160
sku
BCNC150W4FA
supplier
Brook Crompton
specs link
Click here

15Kw (20hp) 4Pole 3phase WDA160L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1470rpm, Full Load Current@400V:28.0amps
Efficiency@Full Load:92.0%, Shaft size:42mm, Weight:106kg
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160
sku
BCNC150W6FA
supplier
Brook Crompton
specs link
Click here

15Kw (20hp) 6Pole 3phase WDA180L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:975rpm, Full Load Current@400V:30.5amps
Efficiency@Full Load:91%, Shaft size:48mm, Weight:132kg
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160
sku
BCNC185W2FA
supplier
Brook Crompton
specs link
Click here

18.5Kw (25hp) 2Pole 3phase WDA160L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2935rpm, Full Load Current@400V:31.4amps
Efficiency@Full Load:92.5%, Shaft size:42mm, Weight:106kg,
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160 V2
sku
BCNC185W4FA
supplier
Brook Crompton
specs link
Click here

18.5Kw (25hp) 4Pole 3phase WDA180M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1478rpm, Full Load Current@400V:34.4amps
Efficiency@Full Load:92.5%, Shaft size:48mm, Weight:132kg
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160 V2
sku
BCNC220W2FA
supplier
Brook Crompton
specs link
Click here

22Kw (30hp) 2Pole 3phase WDA180M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2940rpm, Full Load Current@400V:37.1amps
Efficiency@Full Load:92.5%, Shaft size:48mm, Weight:132kg,
Slide Rails to suit:M1618

Back to Top

W Series WDA132-160
sku
BCNC220W4FA
supplier
Brook Crompton
specs link
Click here

22Kw (30hp) 4Pole 3phase WDA180L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1475rpm, Full Load Current@400V:40.6amps
Efficiency@Full Load:93%, Shaft size:48mm, Weight:141
Slide Rails to suit:M1618

Back to Top

DG SERIES-small left
sku
DG1018
supplier
GDEM
specs link
Click here

0.75Kw (1HP) 2Pole 3Phase DG80 Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2840rpm, Full Load Current @ 400V:1.66amps,
Shaft Size:19mm, Weight:20kgs
Slide Rails to suit:M0809

Back to Top

DG SERIES-small left
sku
DG1021
supplier
GDEM
specs link
Click here

1.1Kw (1 1/2HP) 2Pole 3Phase DG80 Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2878rpm, Full Load Current @ 400V:2.4amps,
Shaft Size:19mm, Weight:20kgs
Slide Rails to suit:M0809

Back to Top

DG SERIES-small right
sku
DG1027
supplier
GDEM
specs link
Click here

1.5Kw (2HP) 2Pole 3Phase DG90S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2875rpm, Full Load Current @ 400V:3.1amps,
Efficiency @ Full Load:85.7,
Shaft Size:24mm, Weight:27kgs
Slide Rails to suit:M0809

Back to Top

DG SERIES-small right
sku
DG1036
supplier
GDEM
specs link
Click here

2.2Kw (3HP) 2Pole 3Phase DG90L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2892rpm, Full Load Current @ 400V:4.3amps,
Efficiency @ Full Load:87.9%,
Shaft Size:24mm, Weight:30kgs
Slide Rails to suit:M0809

Back to Top

DG SERIES-small left
sku
DG1042
supplier
GDEM
specs link
Click here

3Kw (4HP) 2Pole 3Phase DG100L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2896rpm, Full Load Current @ 400V:5.7amps,
Efficiency @ Full Load:87.23%,
Shaft Size:28mm, Weight:41kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-small right
sku
DG1051
supplier
GDEM
specs link
Click here

4Kw (5 1/2HP) 2Pole 3Phase DG112M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2903rpm, Full Load Current @ 400V:7.5amps,
Efficiency @ Full Load:88.22%,
Shaft Size:28mm, Weight:45kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-LARGE LEFT
sku
DG1057
supplier
GDEM
specs link
Click here

5.5Kw (7 1/2HP) 2Pole 3Phase DG132S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:3000rpm, Full Load Current @ 400V:10.1amps,
Efficiency @ Full Load:88.78%,
Shaft Size:38mm, Weight:68kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-LARGE LEFT
sku
DG1063
supplier
GDEM
specs link
Click here

7.5Kw (10HP) 2Pole 3Phase DG132S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2905rpm, Full Load Current @ 400V:13.3amps,
Efficiency @ Full Load:90.16%,
Shaft Size:38mm, Weight:74kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-LARGE LEFT
sku
DG1066
supplier
GDEM
specs link
Click here

9.2Kw (12 1/2HP) 2Pole 3Phase DG132M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2910rpm, Full Load Current @ 400V:15.8amps,
Efficiency @ Full Load:92.2%,
Shaft Size:38mm, Weight:87kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES- LARGE RIGHT
sku
DG1072
supplier
GDEM
specs link
Click here

11Kw (15HP) 2Pole 3Phase DG160M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2935rpm, Full Load Current @ 400V:19.4amps,
Efficiency @ Full Load:90.8%,
Shaft Size:42mm, Weight:109kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES- LARGE RIGHT
sku
DG1078
supplier
GDEM
specs link
Click here

15Kw (20HP) 2Pole 3Phase DG160M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2937rpm, Full Load Current @ 400V:26.2amps,
Efficiency @ Full Load:91.64%,
Shaft Size:42mm, Weight:121kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES- LARGE RIGHT
sku
DG1081
supplier
GDEM
specs link
Click here

18.5Kw (25HP) 2Pole 3Phase DG160L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2938rpm, Full Load Current @ 400V:31.7amps,
Efficiency @ Full Load:92.73%,
Shaft Size:42mm, Weight:136kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES-small left
sku
DG1111
supplier
GDEM
specs link
Click here

0.55Kw (3/4HP) 4Pole 3Phase DG80 Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1480rpm, Full Load Current @ 400V:1.35amps,
Shaft Size:19mm, Weight:21kgs
Slide Rails to suit:M0809
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

DG SERIES-small left
sku
DG1114
supplier
GDEM
specs link
Click here

0.75Kw (1HP) 4Pole 3Phase DG80 Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1437rpm, Full Load Current @ 400V:1.9amps,
Shaft Size:19mm, Weight:26kgs
Slide Rails to suit:M0809

Back to Top

DG SERIES-small right
sku
DG1117
supplier
GDEM
specs link
Click here

1.1Kw (1 1/2HP) 4Pole 3Phase DG90S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1453rpm, Full Load Current @ 400V:2.5amps,
Efficiency @ Full Load:86.2,
Shaft Size:24mm, Weight:28kgs
Slide Rails to suit:M0809

Back to Top

DG SERIES-small right
sku
DG1123
supplier
GDEM
specs link
Click here

1.5Kw (2HP) 4Pole 3Phase DG90L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1454rpm, Full Load Current @ 400V:3.5amps,
Efficiency @ Full Load:85.86%,
Shaft Size:24mm, Weight:34kgs
Slide Rails to suit:M0809

Back to Top

DG SERIES-small left
sku
DG1129
supplier
GDEM
specs link
Click here

2.2Kw (3HP) 4Pole 3Phase DG100L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1445rpm, Full Load Current @ 400V:4.7amps,
Efficiency @ Full Load:86.95%,
Shaft Size:28mm, Weight:43kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-small left
sku
DG1132
supplier
GDEM
specs link
Click here

3Kw (4HP) 4Pole 3Phase DG100L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1440rpm, Full Load Current @ 400V:6.3amps,
Efficiency @ Full Load:88.07%,
Shaft Size:28mm, Weight:45kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-small right
sku
DG1138
supplier
GDEM
specs link
Click here

4Kw (5 1/2HP) 4Pole 3Phase DG112M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1456rpm, Full Load Current @ 400V:8.2amps,
Efficiency @ Full Load:89.51%,
Shaft Size:28mm, Weight:57kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-LARGE LEFT
sku
DG1144
supplier
GDEM
specs link
Click here

5.5Kw (7 1/2HP) 4Pole 3Phase DG132S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1459rpm, Full Load Current @ 400V:11.4amps,
Efficiency @ Full Load:90.09%,
Shaft Size:38mm, Weight:73kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-LARGE LEFT
sku
DG1147
supplier
GDEM
specs link
Click here

7.5Kw (10HP) 4Pole 3Phase DG132M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1462rpm, Full Load Current @ 400V:15.1amps,
Efficiency @ Full Load:91.12%,
Shaft Size:38mm, Weight:86kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-LARGE LEFT
sku
DG1150
supplier
GDEM
specs link
Click here

9.2Kw (12 1/2HP) 4Pole 3Phase DG132M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1460rpm, Full Load Current @ 400V:18.2amps,
Efficiency @ Full Load:91.1%,
Shaft Size:38mm, Weight:95kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES- LARGE RIGHT
sku
DG1156
supplier
GDEM
specs link
Click here

11Kw (15HP) 4Pole 3Phase DG160M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1464rpm, Full Load Current @ 400V:20amps,
Efficiency @ Full Load:91.7%,
Shaft Size:42mm, Weight:120kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES- LARGE RIGHT
sku
DG1159
supplier
GDEM
specs link
Click here

15Kw (20HP) 4Pole 3Phase DG160L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1466rpm, Full Load Current @ 400V:27.2amps,
Efficiency @ Full Load:92.1%,
Shaft Size:42mm, Weight:140kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES-small left
sku
DG1186
supplier
GDEM
specs link
Click here

0.55Kw (3/4HP) 6Pole 3Phase DG80 Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:880rpm, Full Load Current @ 400V:1.5amps,
Shaft Size:19mm, Weight:23kgs
Slide Rails to suit:M0809
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

DG SERIES-small right
sku
DG1189
supplier
GDEM
specs link
Click here

0.75Kw (1HP) 6Pole 3Phase DG90S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:952rpm, Full Load Current @ 400V:2.1amps,
Efficiency @ Full Load:78.3%,
Shaft Size:24mm, Weight:26kgs
Slide Rails to suit:M0809

Back to Top

DG SERIES-small right
sku
DG1192
supplier
GDEM
specs link
Click here

1.1Kw (1 1/2HP) 6Pole 3Phase DG90L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:953rpm, Full Load Current @ 400V:3.1amps,
Efficiency @ Full Load:80.52%,
Shaft Size:24mm, Weight:32kgs
Slide Rails to suit:M0809

Back to Top

DG SERIES-small left
sku
DG1195
supplier
GDEM
specs link
Click here

1.5Kw (2HP) 6Pole 3Phase DG100L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:950rpm, Full Load Current @ 400V:3.7amps,
Efficiency @ Full Load:82.9%,
Shaft Size:28mm, Weight:41kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-small right
sku
DG1198
supplier
GDEM
specs link
Click here

2.2Kw (3HP) 6Pole 3Phase DG112M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:961rpm, Full Load Current @ 400V:4.9amps,
Efficiency @ Full Load:86.2%,
Shaft Size:28mm, Weight:44kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-LARGE LEFT
sku
DG1201
supplier
GDEM
specs link
Click here

3Kw (4HP) 6Pole 3Phase DG132S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:964rpm, Full Load Current @ 400V:7amps,
Efficiency @ Full Load:86.3%,
Shaft Size:38mm, Weight:63kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-LARGE LEFT
sku
DG1204
supplier
GDEM
specs link
Click here

4Kw (5 1/2HP) 6Pole 3Phase DG132M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:969rpm, Full Load Current @ 400V:9.4amps,
Efficiency @ Full Load:87.5%,
Shaft Size:38mm, Weight:72kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-LARGE LEFT
sku
DG1207
supplier
GDEM
specs link
Click here

5.5Kw (7 1/2HP) 6Pole 3Phase DG132M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:969rpm, Full Load Current @ 400V:12.0amps,
Efficiency @ Full Load:89.5%,
Shaft Size:38mm, Weight:81kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES- LARGE RIGHT
sku
DG1210
supplier
GDEM
specs link
Click here

7.5Kw (10HP) 6Pole 3Phase DG160M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:973rpm, Full Load Current @ 400V:15.9amps,
Efficiency @ Full Load:89.6%,
Shaft Size:42mm, Weight:115kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES-small left
sku
DG1241
supplier
GDEM
specs link
Click here

0.75Kw (1HP) 8Pole 3Phase DG100L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:701rpm, Full Load Current @ 400V:2.3amps,
Efficiency @ Full Load:77.1%,
Shaft Size:28mm, Weight:37kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-small left
sku
DG1243
supplier
GDEM
specs link
Click here

1.1Kw (1 1/2HP) 8Pole 3Phase DG100L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:701rpm, Full Load Current @ 400V:3.2amps,
Efficiency @ Full Load:79.4%,
Shaft Size:28mm, Weight:41kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-small right
sku
DG1246
supplier
GDEM
specs link
Click here

1.5Kw (2HP) 8Pole 3Phase DG112M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:711rpm, Full Load Current @ 400V:4.1amps,
Efficiency @ Full Load:82.4%,
Shaft Size:28mm, Weight:44kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-LARGE LEFT
sku
DG1249
supplier
GDEM
specs link
Click here

2.2Kw (3HP) 8Pole 3Phase DG132S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:715rpm, Full Load Current @ 400V:5.6amps,
Efficiency @ Full Load:84.0%,
Shaft Size:38mm, Weight:63kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES-LARGE LEFT
sku
DG1252
supplier
GDEM
specs link
Click here

3Kw (4HP) 8Pole 3Phase DG132M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:715rpm, Full Load Current @ 400V:7.3amps,
Efficiency @ Full Load:84.9%,
Shaft Size:38mm, Weight:72kgs
Slide Rails to suit:M1013

Back to Top

DG SERIES- LARGE RIGHT
sku
DG1255
supplier
GDEM
specs link
Click here

4Kw (5 1/2HP) 8Pole 3Phase DG160M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:713rpm, Full Load Current @ 400V:9.5amps,
Efficiency @ Full Load:86.2%,
Shaft Size:42mm, Weight:95kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES-LARGE LEFT
sku
DG4087
supplier
GDEM
specs link
Click here

22Kw (30HP) 2Pole 3Phase DG180M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2949rpm, Full Load Current @ 400V:38.3amps,
Efficiency @ Full Load:93.27%,
Shaft Size:48mm, Weight:185kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4090
supplier
GDEM
specs link
Click here

30Kw (40HP) 2Pole 3Phase DG200L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2956rpm, Full Load Current @ 400V:51.5amps,
Efficiency @ Full Load:93.39%,
Shaft Size:55mm, Weight:234kgs
Slide Rails to suit:M2022

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4093
supplier
GDEM
specs link
Click here

37Kw (50HP) 2Pole 3Phase DG200L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2953rpm, Full Load Current @ 400V:62.7amps,
Efficiency @ Full Load:93.89%,
Shaft Size:55mm, Weight:246kgs
Slide Rails to suit:M2022

Back to Top

DG SERIES-LARGE LEFT
sku
DG4096
supplier
GDEM
specs link
Click here

45Kw (60HP) 2Pole 3Phase DG225M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2966rpm, Full Load Current @ 400V:75.4amps,
Efficiency @ Full Load:95.02%,
Shaft Size:55mm, Weight:338kgs
Slide Rails to suit:M2022

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4099
supplier
GDEM
specs link
Click here

55Kw (75HP) 2Pole 3Phase DG250S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2969rpm, Full Load Current @ 400V:96.3amps,
Efficiency @ Full Load:95.73%,
Shaft Size:60mm, Weight:397kgs
Slide Rails to suit:M2528

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4102
supplier
GDEM
specs link
Click here

75Kw (100HP) 2Pole 3Phase DG250M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2960rpm, Full Load Current @ 400V:129.7amps,
Efficiency @ Full Load:95.5%,
Shaft Size:60mm, Weight:630kgs,
Slide Rails to suit: M2528

Back to Top

DG SERIES-LARGE LEFT
sku
DG4105
supplier
GDEM
specs link
Click here

90Kw (120HP) 2Pole 3Phase DG280S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2977rpm, Full Load Current @ 400V:152.2amps,
Efficiency @ Full Load:95.53%,
Shaft Size:65mm, Weight:610kgs,
Slide Rails to suit:M2528

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4108A
supplier
GDEM
specs link
Click here

110Kw (147HP) 2Pole 3Phase DG280M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2976rpm, Full Load Current @ 400V:186.9amps,
Efficiency @ Full Load:95.6%,
Shaft Size:65mm, Weight:630kgs
Slide Rails to suit:M2528

Back to Top

DG SERIES-LARGE LEFT
sku
DG4111
supplier
GDEM
specs link
Click here

132Kw (176HP) 2Pole 3Phase DG315S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2978rpm, Full Load Current @ 400V:221.5amps,
Efficiency @ Full Load:95.5%,
Shaft Size:65mm, Weight:980kgs
Slide Rails to suit:M3100

Back to Top

DG SERIES-LARGE LEFT
sku
DG4114
supplier
GDEM
specs link
Click here

160Kw (213HP) 2Pole 3Phase DG315M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:2978rpm, Full Load Current @ 400V:267amps,
Efficiency @ Full Load:95.9%
Shaft Size:65mm, Weight:1040kgs
Slide Rails to suit:M3100

Back to Top

DG SERIES-LARGE LEFT
sku
DG4162
supplier
GDEM
specs link
Click here

18.5Kw (25HP) 4Pole 3Phase DG180M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1467rpm, Full Load Current @ 400V:33.1amps,
Efficiency @ Full Load:92.82%,
Shaft Size:48mm, Weight:167kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES-LARGE LEFT
sku
DG4165
supplier
GDEM
specs link
Click here

22Kw (30HP) 4Pole 3Phase DG180L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1467rpm, Full Load Current @ 400V:39.1amps,
Efficiency @ Full Load:93.3%,
Shaft Size:48mm, Weight:200kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4168
supplier
GDEM
specs link
Click here

30Kw (40HP) 4Pole 3Phase DG200L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1473rpm, Full Load Current @ 400V:52.8amps,
Efficiency @ Full Load:93.93%,
Shaft Size:55mm, Weight:251kgs
Slide Rails to suit:M2022

Back to Top

DG SERIES-LARGE LEFT
sku
DG4171
supplier
GDEM
specs link
Click here

37Kw (50HP) 4Pole 3Phase DG225S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1479rpm, Full Load Current @ 400V:65.5amps,
Efficiency @ Full Load:94.32%,
Shaft Size:60mm, Weight:300kgs
Slide Rails to suit:M2022

Back to Top

DG SERIES-LARGE LEFT
sku
DG4174
supplier
GDEM
specs link
Click here

45Kw (60HP) 4Pole 3Phase DG225M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1476rpm, Full Load Current @ 400V:78.5amps,
Efficiency @ Full Load:94.7%,
Shaft Size:60mm, Weight:333kgs
Slide Rails to suit:M2022

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4177
supplier
GDEM
specs link
Click here

55Kw (75HP) 4Pole 3Phase DG250S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1480rpm, Full Load Current @ 400V:97.6amps,
Efficiency @ Full Load:95.0%,
Shaft Size:70mm, Weight:410kgs
Slide Rails to suit:M2528

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4180A
supplier
GDEM
specs link
Click here

75Kw (100HP) 4Pole 3Phase DG250M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1480rpm, Full Load Current @ 400V:131.9amps,
Efficiency @ Full Load:95.4%,
Shaft Size:70mm, Weight:465kgs,
Slide Rails to suit: M2528

Back to Top

DG SERIES-LARGE LEFT
sku
DG4183
supplier
GDEM
specs link
Click here

90Kw (120HP) 4Pole 3Phase DG280S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1487rpm, Full Load Current @ 400V:151.3amps,
Efficiency @ Full Load:96.3%,
Shaft Size:80mm, Weight:630kgs,
Slide Rails to suit:M2528

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4186A
supplier
GDEM
specs link
Click here

110Kw (147HP) 4Pole 3Phase DG280M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1487rpm, Full Load Current @ 400V:184amps,
Efficiency @ Full Load:95.93%,
Shaft Size:80mm, Weight:720kgs
Slide Rails to suit:M2528

Back to Top

DG SERIES-LARGE LEFT
sku
DG4189
supplier
GDEM
specs link
Click here

132Kw (176HP) 4Pole 3Phase DG315S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:1487rpm, Full Load Current @ 400V:220.9amps,
Efficiency @ Full Load:96.41%,
Shaft Size:85mm, Weight:1020kgs
Slide Rails to suit:M3100

Back to Top

DG SERIES-LARGE LEFT
sku
DG4192
supplier
GDEM
specs link
Click here

160Kw (213HP) 4Pole 3Phase DG315M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed1484rpm, Full Load Current @ 400V:267.6amps,
Efficiency @ Full Load:96.6%
Shaft Size:85mm, Weight:1060kgs
Slide Rails to suit:M3100

Back to Top

DG SERIES-LARGE LEFT
sku
DG4198
supplier
GDEM
specs link
Click here

200Kw (267HP) 4Pole 3Phase DG315L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed1486rpm, Full Load Current @ 400V:340.6amps,
Efficiency @ Full Load:96.3%
Shaft Size:85mm, Weight:1060kgs
Slide Rails to suit:M3100

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4213
supplier
GDEM
specs link
Click here

11Kw (15HP) 6Pole 3Phase DG160L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:974rpm, Full Load Current @ 400V:23.0amps,
Efficiency @ Full Load:90.54%,
Shaft Size:42mm, Weight:140kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES-LARGE LEFT
sku
DG4216
supplier
GDEM
specs link
Click here

15Kw (20HP) 6Pole 3Phase DG180L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:979rpm, Full Load Current @ 400V:29.1amps,
Efficiency @ Full Load:91.7%,
Shaft Size:48mm, Weight:185kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4219
supplier
GDEM
specs link
Click here

18.5Kw (25HP) 6Pole 3Phase DG200L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:980rpm, Full Load Current @ 400V:35.5amps,
Efficiency @ Full Load:92.7%,
Shaft Size:55mm, Weight:220kgs
Slide Rails to suit:M2022

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4222
supplier
GDEM
specs link
Click here

22Kw (30HP) 6Pole 3Phase DG200L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:980rpm, Full Load Current @ 400V:43.4amps,
Efficiency @ Full Load:92.2%,
Shaft Size:55mm, Weight:245kgs
Slide Rails to suit:M2022

Back to Top

DG SERIES-LARGE LEFT
sku
DG4225
supplier
GDEM
specs link
Click here

30Kw (40HP) 6Pole 3Phase DG225M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:983rpm, Full Load Current @ 400V:57.4amps,
Efficiency @ Full Load:93.1%,
Shaft Size:60mm, Weight:300kgs
Slide Rails to suit:M2022

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4228
supplier
GDEM
specs link
Click here

37Kw (50HP) 6Pole 3Phase DG250S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:986rpm, Full Load Current @ 400V:65.1amps,
Efficiency @ Full Load:94.1%,
Shaft Size:70mm, Weight:400kgs
Slide Rails to suit:M2528

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4230
supplier
GDEM
specs link
Click here

45Kw (60HP) 6Pole 3Phase DG250M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:986rpm, Full Load Current @ 400V:78.1amps,
Efficiency @ Full Load:94.4%,
Shaft Size:70mm, Weight:450kgs,
Slide Rails to suit: M2528

Back to Top

DG SERIES-LARGE LEFT
sku
DG4234
supplier
GDEM
specs link
Click here

55Kw (75HP) 6Pole 3Phase DG280S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:980rpm, Full Load Current @ 400V:97.2amps,
Efficiency @ Full Load:93.9%,
Shaft Size:80mm, Weight:560kgs,
Slide Rails to suit:M2528

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4237A
supplier
GDEM
specs link
Click here

75Kw (100HP) 6Pole 3Phase DG280M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:989rpm, Full Load Current @ 400V:127amps,
Efficiency @ Full Load:95.7%,
Shaft Size:80mm, Weight:670kgs
Slide Rails to suit:M2528

Back to Top

DG SERIES-LARGE LEFT
sku
DG4240
supplier
GDEM
specs link
Click here

90Kw (120HP) 6Pole 3Phase DG315S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:990rpm, Full Load Current @ 400V:169.5amps,
Efficiency @ Full Load:94.8%,
Shaft Size:85mm, Weight:1000kgs
Slide Rails to suit:M3100

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4287
supplier
GDEM
specs link
Click here

5.5Kw (7 1/2HP) 8Pole 3Phase DG160M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:720rpm, Full Load Current @ 400V:12.7amps,
Efficiency @ Full Load:85.8%,
Shaft Size:42mm, Weight:110kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4290
supplier
GDEM
specs link
Click here

7.5Kw (10HP) 8Pole 3Phase DG160L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:717rpm, Full Load Current @ 400V:16.5amps,
Efficiency @ Full Load:88.99%,
Shaft Size:42mm, Weight:134kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES-LARGE LEFT
sku
DG4293
supplier
GDEM
specs link
Click here

11Kw (15HP) 8Pole 3Phase DG180L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:724rpm, Full Load Current @ 400V:22.6amps,
Efficiency @ Full Load:90.8%,
Shaft Size:48mm, Weight:185kgs
Slide Rails to suit:M1618

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4296
supplier
GDEM
specs link
Click here

15Kw (20HP) 8Pole 3Phase DG200L Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:730rpm, Full Load Current @ 400V:33.8amps,
Efficiency @ Full Load:90%,
Shaft Size:55mm, Weight:240kgs
Slide Rails to suit:M2022

Back to Top

DG SERIES-LARGE LEFT
sku
DG4299
supplier
GDEM
specs link
Click here

18.5Kw (25HP) 8Pole 3Phase DG225S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:732rpm, Full Load Current @ 400V:37.4amps,
Efficiency @ Full Load:92.5%,
Shaft Size:60mm, Weight:270kgs
Slide Rails to suit:M2022

Back to Top

DG SERIES-LARGE LEFT
sku
DG4302
supplier
GDEM
specs link
Click here

22Kw (30HP) 8Pole 3Phase DG225M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:730rpm, Full Load Current @ 400V:45.8amps,
Efficiency @ Full Load:91.2%,
Shaft Size:60mm, Weight:300kgs
Slide Rails to suit:M2022

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4305
supplier
GDEM
specs link
Click here

30Kw (40HP) 8Pole 3Phase DG250S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:735rpm, Full Load Current @ 400V:59.5amps,
Efficiency @ Full Load:92.1%,
Shaft Size:70mm, Weight:400kgs
Slide Rails to suit:M2528

Back to Top

DG SERIES- LARGE RIGHT
sku
DG4308
supplier
GDEM
specs link
Click here

37Kw (50HP) 8Pole 3Phase DG250M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:735rpm, Full Load Current @ 400V:72.9amps,
Efficiency @ Full Load:92.7%,
Shaft Size:70mm, Weight:450kgs,
Slide Rails to suit: M2528

Back to Top

DG SERIES-LARGE LEFT
sku
DG4311
supplier
GDEM
specs link
Click here

45Kw (60HP) 8Pole 3Phase DG280S Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:735rpm, Full Load Current @ 400V:88.2amps,
Efficiency @ Full Load:93.2%,
Shaft Size:80mm, Weight:560kgs,
Slide Rails to suit:M2528

Back to Top

DG SERIES-LARGE LEFT
sku
DG4311A
supplier
GDEM
specs link
Click here

55Kw (75HP) 8Pole 3Phase DG280M Frame, Cast Iron

The DG Premium Range of electric motor comply or exceed the minimum requirements of AS/NZS1359.5:2004 for energy efficiency as required by NZ Government regulations. The robust cast iron construction is most suitable for safe areas where a high degree of mechanical and IP rating is required. All I.E.C. mounting configurations are available.
Full Load Speed:735rpm, Full Load Current @ 400V:107amps,
Efficiency @ Full Load:93.7%,
Shaft Size:80mm, Weight:670kgs,
Slide Rails to suit:M2528

Back to Top

sku
BC98185002
supplier
Brook Crompton
specs link
Click here

DC BINDER BRAKE 71 FRAME 764-08 4Nm

Brook Crompton offers a competitive, innovative brake kit concept with
• Proven reliability with long life.
• DC and AC options.
• Various torque settings for rapid or softer braking.
• Fast reaction ‘force voltage’ option.

Back to Top

sku
BC98185002
supplier
Brook Crompton
specs link
Click here

DC BINDER BRAKE 80 FRAME 764-10 10Nm

Brook Crompton offers a competitive, innovative brake kit concept with
• Proven reliability with long life.
• DC and AC options.
• Various torque settings for rapid or softer braking.
• Fast reaction ‘force voltage’ option.

Back to Top

sku
BC98185004
supplier
Brook Crompton
specs link
Click here

AC BINDER BRAKE 71 FRAME 733-09 5Nm

Brook Crompton offers a competitive, innovative brake kit concept with
• Proven reliability with long life.
• DC and AC options.
• Various torque settings for rapid or softer braking.
• Fast reaction ‘force voltage’ option.

Back to Top

sku
BC98205004
supplier
Brook Crompton
specs link
Click here

AC BINDER BRAKE 80 FRAME 734-10 7.5Nm

Brook Crompton offers a competitive, innovative brake kit concept with
• Proven reliability with long life.
• DC and AC options.
• Various torque settings for rapid or softer braking.
• Fast reaction ‘force voltage’ option.

Back to Top

sku
BC98225004
supplier
Brook Crompton
specs link
Click here

DC BINDER BRAKE 90 FRAME 764-11 20Nm

Brook Crompton offers a competitive, innovative brake kit concept with
• Proven reliability with long life.
• DC and AC options.
• Various torque settings for rapid or softer braking.
• Fast reaction ‘force voltage’ option.

Back to Top

sku
BC98225006
supplier
Brook Crompton
specs link
Click here

AC BINDER BRAKE 90 FRAME 734-11 15Nm

Brook Crompton offers a competitive, innovative brake kit concept with
• Proven reliability with long life.
• DC and AC options.
• Various torque settings for rapid or softer braking.
• Fast reaction ‘force voltage’ option.

Back to Top

sku
BC98245003
supplier
Brook Crompton
specs link
Click here

DC BINDER BRAKE 100 FRAME 764-13 40Nm

Brook Crompton offers a competitive, innovative brake kit concept with
• Proven reliability with long life.
• DC and AC options.
• Various torque settings for rapid or softer braking.
• Fast reaction ‘force voltage’ option.

Back to Top

sku
BC98245009
supplier
Brook Crompton
specs link
Click here

AC BINDER BRAKE 100 FRAME 734-13 35Nm

Brook Crompton offers a competitive, innovative brake kit concept with
• Proven reliability with long life.
• DC and AC options.
• Various torque settings for rapid or softer braking.
• Fast reaction ‘force voltage’ option.

Back to Top

sku
BC98265003
supplier
Brook Crompton
specs link
Click here

DC BINDER BRAKE 112 FRAME 764-13 40Nm

Brook Crompton offers a competitive, innovative brake kit concept with
• Proven reliability with long life.
• DC and AC options.
• Various torque settings for rapid or softer braking.
• Fast reaction ‘force voltage’ option.

Back to Top

sku
BC98265013
supplier
Brook Crompton
specs link
Click here

AC BINDER BRAKE 112 FRAME 734-13 35Nm

Brook Crompton offers a competitive, innovative brake kit concept with
• Proven reliability with long life.
• DC and AC options.
• Various torque settings for rapid or softer braking.
• Fast reaction ‘force voltage’ option.

Back to Top

sku
DL120TYD
supplier
ZWDM
specs link
Click here

120TYD 1 & 3 PHASE, LOW SPEED, GEARLESS MOTOR

The DL Series of permanent magnet AC synchronous motors are a unique design low speed motor with a worldwide patent. These motors are extremely efficient with regard to input current and output torques. A capacitor, resistor combination is incorporated in the single phase versions and reverse switching is easily achieved. Refer to specs link for further information, speed & torques

Back to Top

sku
DL140TYD
supplier
ZWDM
specs link
Click here

140TYD THREE PHASE, LOW SPEED, GEARLESS MOTOR

The DL Series of permanent magnet AC synchronous motors are a unique design low speed motor with a worldwide patent. These motors are extremely efficient with regard to input current and output torques. Three phase versions can run at 220V or 400V enabling further speed control with a standard variable frequency drive, governed to 60Hz.
Refer to specs link for further information, speed & torques.
VSD selection is model V450M.

Back to Top

sku
DL170TYD
supplier
ZWDM
specs link
Click here

170TYD THREE PHASE, LOW SPEED, GEARLESS MOTOR

The DL Series of permanent magnet AC synchronous motors are a unique design low speed motor with a worldwide patent. These motors are extremely efficient with regard to input current and output torques. Three phase versions can run at 220V or 400V enabling further speed control with a standard variable frequency drive, governed to 60Hz.
Refer to specs link for further information, speed & torques.
VSD selection is model V450M-01H.

Back to Top

sku
DL70TYD
supplier
ZWDM
specs link
Click here

70TYD 1 & 3 PHASE, LOW SPEED, GEARLESS MOTOR

The DL Series of permanent magnet AC synchronous motors are a unique design low speed motor with a worldwide patent. These motors are extremely efficient with regard to input current and output torques. A capacitor, resistor combination is incorporated in the single phase versions and reverse switching is easily achieved. Refer to specs link for further information, speed & torques.

Back to Top

sku
DL90TYD
supplier
ZWDM
specs link
Click here

90TYD 1 & 3 PHASE, LOW SPEED, GEARLESS MOTOR

The DL Series of permanent magnet AC synchronous motors are a unique design low speed motor with a worldwide patent. These motors are extremely efficient with regard to input current and output torques. A capacitor, resistor combination is incorporated in the single phase versions and reverse switching is easily achieved. Refer to specs link for further information, speed & torques

Back to Top

sku
FC1006
supplier
CEMP s.r.l
specs link
Click here

0.18Kw 2Pole 3phase 63A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:2857, Full Load Current@400V:0.75amps
Shaft Size:11mm, Weight:16kgs

Back to Top

sku
FC1009
supplier
CEMP s.r.l
specs link
Click here

0.25Kw 2Pole 3phase 63B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:2805, Full Load Current@400V:0.85amps
Shaft Size:11mm, Weight:16kgs

Back to Top

sku
FC1012
supplier
CEMP s.r.l
specs link
Click here

0.37Kw 2Pole 3phase 71A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:2800, Full Load Current@400V:1.1amps
Shaft Size:14mm, Weight:19kgs

Back to Top

sku
FC1015
supplier
CEMP s.r.l
specs link
Click here

0.55Kw 2Pole 3phase 71B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:2830, Full Load Current@400V:1.4amps
Shaft Size:14mm, Weight:19kgs

Back to Top

sku
FC1094
supplier
CEMP s.r.l
specs link
Click here

0.12Kw 4Pole 3phase 63A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:1380, Full Load Current@400V:0.62amps
Shaft Size:11mm, Weight:16kgs

Back to Top

sku
FC1099
supplier
CEMP s.r.l
specs link
Click here

0.18Kw 4Pole 3phase 63B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:1340, Full Load Current@400V:0.67amps
Shaft Size:11mm, Weight:16kgs

Back to Top

sku
FC1102
supplier
CEMP s.r.l
specs link
Click here

0.25Kw 4Pole 3phase 71A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:1372, Full Load Current@400V:0.80amps
Shaft Size:14mm, Weight:19kgs

Back to Top

sku
FC1105
supplier
CEMP s.r.l
specs link
Click here

0.37Kw 4Pole 3phase 71B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:1390, Full Load Current@400V:1.1amps
Shaft Size:14mm, Weight:19kgs

Back to Top

sku
FC1111
supplier
CEMP s.r.l
specs link
Click here

0.55Kw 4Pole 3phase 80A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:1380, Full Load Current@400V:1.6amps
Shaft Size:19mm, Weight:26kgs

Back to Top

sku
FC1172
supplier
CEMP s.r.l
specs link
Click here

0.09Kw 6Pole 3phase 63B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:850, Full Load Current@400V:0.65amps
Shaft Size:11mm, Weight:16kgs

Back to Top

sku
FC1177
supplier
CEMP s.r.l
specs link
Click here

0.18Kw 6Pole 3phase 71A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:945, Full Load Current@400V:0.92amps
Shaft Size:14mm, Weight:19kgs

Back to Top

sku
FC1180
supplier
CEMP s.r.l
specs link
Click here

0.26Kw 6Pole 3phase 71B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:918, Full Load Current@400V:1.00amps
Shaft Size:14mm, Weight:19kgs

Back to Top

sku
FC1183
supplier
CEMP s.r.l
specs link
Click here

0.37Kw 6Pole 3phase 80A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:930, Full Load Current@400V:1.6amps
Shaft Size:19mm, Weight:26kgs

Back to Top

sku
FC1186
supplier
CEMP s.r.l
specs link
Click here

0.55Kw 6Pole 3phase 80B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in three phase, are the AB30 type, EExd, IIB, T4, IP55.
Full Load Speed:930, Full Load Current@400V:1.80amps
Shaft Size:19mm, Weight:26kgs

Back to Top

sku
FC1534
supplier
CEMP s.r.l
specs link
Click here

0.10Kw 2Pole 1phase 63A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase are AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2750, Full Load Current@230V:1.3amps
Shaft Size:11mm, Weight:16kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1540
supplier
CEMP s.r.l
specs link
Click here

0.15Kw 2Pole 1phase 63B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2750, Full Load Current@230V:1.3amps
Shaft Size:11mm, Weight:16kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1543
supplier
CEMP s.r.l
specs link
Click here

0.20Kw 2Pole 1phase 71A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2800, Full Load Current@230V:2.6amps
Shaft Size:14mm, Weight:19kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1546
supplier
CEMP s.r.l
specs link
Click here

0.40Kw 2Pole 1phase 71B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2730, Full Load Current@230V:2.9amps
Shaft Size:14mm, Weight:19kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1549
supplier
CEMP s.r.l
specs link
Click here

0.55Kw 2Pole 1phase 80A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2720, Full Load Current@230V:5.4amps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1552
supplier
CEMP s.r.l
specs link
Click here

0.75Kw 2Pole 1phase 80B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2790, Full Load Current@230V:5.3amps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1555
supplier
CEMP s.r.l
specs link
Click here

1.1Kw 2Pole 1phase 90S Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2750, Full Load Current@230V:7.8amps
Shaft Size:24mm, Weight:33kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1560
supplier
CEMP s.r.l
specs link
Click here

1.5Kw 2Pole 1phase 90L Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2800, Full Load Current@230V:8.9amps
Shaft Size:24mm, Weight:33kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1566
supplier
CEMP s.r.l
specs link
Click here

2.2Kw 2Pole 1phase 100LA Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2800, Full Load Current@230V:15.5amps
Shaft Size:28mm, Weight:46kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1572
supplier
CEMP s.r.l
specs link
Click here

3Kw 2Pole 1phase 100LB Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2800, Full Load Current@230V:18amps
Shaft Size:28mm, Weight:46kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1584
supplier
CEMP s.r.l
specs link
Click here

0.09Kw 4Pole 1phase 63A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1360, Full Load Current@230V:1.1amps
Shaft Size:11mm, Weight:16kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1587
supplier
CEMP s.r.l
specs link
Click here

0.13Kw 4Pole 1phase 63B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1350, Full Load Current@230V:1.3amps
Shaft Size:11mm, Weight:16kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1590
supplier
CEMP s.r.l
specs link
Click here

0.15Kw 4Pole 1phase 71A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1380, Full Load Current@230V:1.7amps
Shaft Size:14mm, Weight:19kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1593
supplier
CEMP s.r.l
specs link
Click here

0.25Kw 4Pole 1phase 71B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1380, Full Load Current@230V:2.3amps
Shaft Size:14mm, Weight:19kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1596
supplier
CEMP s.r.l
specs link
Click here

0.35Kw 4Pole 1phase 80A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1410, Full Load Current@230V:3.3amps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1598
supplier
CEMP s.r.l
specs link
Click here

0.45Kw 4Pole 1phase 80B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1420, Full Load Current@230V:4.3amps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1599
supplier
CEMP s.r.l
specs link
Click here

0.55Kw 4Pole 1phase 80L Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1420, Full Load Current@230V:4.9mps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1602
supplier
CEMP s.r.l
specs link
Click here

0.75Kw 4Pole 1phase 90S Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1420, Full Load Current@230V:5.9amps
Shaft Size:24mm, Weight:33kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1608
supplier
CEMP s.r.l
specs link
Click here

1.1Kw 4Pole 1phase 90L Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1430, Full Load Current@230V:7.2amps
Shaft Size:24mm, Weight:33kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1610
supplier
CEMP s.r.l
specs link
Click here

1.3Kw 4Pole 1phase 100LA Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1370, Full Load Current@230V:8.1amps
Shaft Size:28mm, Weight:46kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1611
supplier
CEMP s.r.l
specs link
Click here

1.6Kw 4Pole 1phase 100LB Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1400, Full Load Current@230V:10amps
Shaft Size:28mm, Weight:46kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1626
supplier
CEMP s.r.l
specs link
Click here

0.10Kw 6Pole 1phase 71A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:900, Full Load Current@230V:1.5amps
Shaft Size:11mm, Weight:19kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1629
supplier
CEMP s.r.l
specs link
Click here

0.15Kw 6Pole 1phase 71B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:850, Full Load Current@230V:1.4amps
Shaft Size:14mm, Weight:19kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1632
supplier
CEMP s.r.l
specs link
Click here

0.20Kw 6Pole 1phase 80A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:910, Full Load Current@230V:2.7amps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1638
supplier
CEMP s.r.l
specs link
Click here

0.30Kw 6Pole 1phase 80B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:930, Full Load Current@230V:3amps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1644
supplier
CEMP s.r.l
specs link
Click here

0.55Kw 6Pole 1phase 90S Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:920, Full Load Current@230V:4.3amps
Shaft Size:24mm, Weight:33kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1647
supplier
CEMP s.r.l
specs link
Click here

0.75Kw 6Pole 1phase 90L Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:910, Full Load Current@230V:6.1amps
Shaft Size:24mm, Weight:33kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1653
supplier
CEMP s.r.l
specs link
Click here

1.1Kw 6Pole 1phase 100LB Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:920, Full Load Current@230V:8.0amps
Shaft Size:28mm, Weight:46kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FLP1021
supplier
Elpromtech Srl
specs link
Click here

1.1KW 2POLE 3PHASE 80B Ex de FLAMEPROOF

Elprom Aluminium Flameproof Motors are a perfect solution where weight is an issue.
Ex de IIC T4 in frame size 56 - 132 (2 and 4 poles) 0,12 -7.5kW.
The Elprom Series of aluminium flameproof motors are completely modular. The feet and flanges can be mounted without affecting the Ex integrity. Repositioning the feet and with the unique flange ring arrangement, it’s possible to get every mounting arrangement without compromising the ATEX approval

Back to Top

sku
FLP1036
supplier
Elpromtech Srl
specs link
Click here

2.2KW 2POLE 3PHASE 90L Ex de FLAMEPROOF

Elprom Aluminium Flameproof Motors are a perfect solution where weight is an issue.
Ex de IIC T4 in frame size 56 - 132 (2 and 4 poles) 0,12 -7.5kW.
The Elprom Series of aluminium flameproof motors are completely modular. The feet and flanges can be mounted without affecting the Ex integrity. Repositioning the feet and with the unique flange ring arrangement, it’s possible to get every mounting arrangement without compromising the ATEX approval

Back to Top

sku
FLP1042
supplier
Elpromtech Srl
specs link
Click here

3KW 2POLE 3PHASE 100L Ex de FLAMEPROOF

Elprom Aluminium Flameproof Motors are a perfect solution where weight is an issue.
Ex de IIC T4 in frame size 56 - 132 (2 and 4 poles) 0,12 -7.5kW.
The Elprom Series of aluminium flameproof motors are completely modular. The feet and flanges can be mounted without affecting the Ex integrity. Repositioning the feet and with the unique flange ring arrangement, it’s possible to get every mounting arrangement without compromising the ATEX approval

Back to Top

sku
FLP1051
supplier
Elpromtech Srl
specs link
Click here

4KW 2POLE 3PHASE 112M Ex de FLAMEPROOF

Elprom Aluminium Flameproof Motors are a perfect solution where weight is an issue.
Ex de IIC T4 in frame size 56 - 132 (2 and 4 poles) 0,12 -7.5kW.
The Elprom Series of aluminium flameproof motors are completely modular. The feet and flanges can be mounted without affecting the Ex integrity. Repositioning the feet and with the unique flange ring arrangement, it’s possible to get every mounting arrangement without compromising the ATEX approval

Back to Top

sku
FLP1114
supplier
Elpromtech Srl
specs link
Click here

.75KW 4POLE 3PHASE 80B Ex de FLAMEPROOF

Elprom Aluminium Flameproof Motors are a perfect solution where weight is an issue.
Ex de IIC T4 in frame size 56 - 132 (2 and 4 poles) 0,12 -7.5kW.
The Elprom Series of aluminium flameproof motors are completely modular. The feet and flanges can be mounted without affecting the Ex integrity. Repositioning the feet and with the unique flange ring arrangement, it’s possible to get every mounting arrangement without compromising the ATEX approval

Back to Top

sku
FLP1117
supplier
Elpromtech Srl
specs link
Click here

1.1KW 4POLE 3PHASE 90S Ex de FLAMEPROOF

Elprom Aluminium Flameproof Motors are a perfect solution where weight is an issue.
Ex de IIC T4 in frame size 56 - 132 (2 and 4 poles) 0,12 -7.5kW.
The Elprom Series of aluminium flameproof motors are completely modular. The feet and flanges can be mounted without affecting the Ex integrity. Repositioning the feet and with the unique flange ring arrangement, it’s possible to get every mounting arrangement without compromising the ATEX approval

Back to Top

sku
FLP1123
supplier
Elpromtech Srl
specs link
Click here

1.5KW 4POLE 3PHASE 90L Ex de FLAMEPROOF

Elprom Aluminium Flameproof Motors are a perfect solution where weight is an issue.
Ex de IIC T4 in frame size 56 - 132 (2 and 4 poles) 0,12 -7.5kW.
The Elprom Series of aluminium flameproof motors are completely modular. The feet and flanges can be mounted without affecting the Ex integrity. Repositioning the feet and with the unique flange ring arrangement, it’s possible to get every mounting arrangement without compromising the ATEX approval

Back to Top

sku
FLP1129
supplier
Elpromtech Srl
specs link
Click here

2.2KW 4POLE 3PHASE 100K Ex de FLAMEPROOF

Elprom Aluminium Flameproof Motors are a perfect solution where weight is an issue.
Ex de IIC T4 in frame size 56 - 132 (2 and 4 poles) 0,12 -7.5kW.
The Elprom Series of aluminium flameproof motors are completely modular. The feet and flanges can be mounted without affecting the Ex integrity. Repositioning the feet and with the unique flange ring arrangement, it’s possible to get every mounting arrangement without compromising the ATEX approval

Back to Top

sku
FLP1132
supplier
Elpromtech Srl
specs link
Click here

3KW 4POLE 3PHASE 100L Ex de FLAMEPROOF

Elprom Aluminium Flameproof Motors are a perfect solution where weight is an issue.
Ex de IIC T4 in frame size 56 - 132 (2 and 4 poles) 0,12 -7.5kW.
The Elprom Series of aluminium flameproof motors are completely modular. The feet and flanges can be mounted without affecting the Ex integrity. Repositioning the feet and with the unique flange ring arrangement, it’s possible to get every mounting arrangement without compromising the ATEX approval

Back to Top

sku
FLP1138
supplier
Elpromtech Srl
specs link
Click here

4KW 4POLE 3PHASE 112M Ex de FLAMEPROOF

Elprom Aluminium Flameproof Motors are a perfect solution where weight is an issue.
Ex de IIC T4 in frame size 56 - 132 (2 and 4 poles) 0,12 -7.5kW.
The Elprom Series of aluminium flameproof motors are completely modular. The feet and flanges can be mounted without affecting the Ex integrity. Repositioning the feet and with the unique flange ring arrangement, it’s possible to get every mounting arrangement without compromising the ATEX approval

Back to Top

sku
FLP1144
supplier
Elpromtech Srl
specs link
Click here

5.5KW 4POLE 3PHASE 132S Ex de FLAMEPROOF

Elprom Aluminium Flameproof Motors are a perfect solution where weight is an issue.
Ex de IIC T4 in frame size 56 - 132 (2 and 4 poles) 0,12 -7.5kW.
The Elprom Series of aluminium flameproof motors are completely modular. The feet and flanges can be mounted without affecting the Ex integrity. Repositioning the feet and with the unique flange ring arrangement, it’s possible to get every mounting arrangement without compromising the ATEX approval

Back to Top

sku
FLP1147
supplier
Elpromtech Srl
specs link
Click here

7.5KW 4POLE 3PHASE 132M Ex de FLAMEPROOF

Elprom Aluminium Flameproof Motors are a perfect solution where weight is an issue.
Ex de IIC T4 in frame size 56 - 132 (2 and 4 poles) 0,12 -7.5kW.
The Elprom Series of aluminium flameproof motors are completely modular. The feet and flanges can be mounted without affecting the Ex integrity. Repositioning the feet and with the unique flange ring arrangement, it’s possible to get every mounting arrangement without compromising the ATEX approval

Back to Top

sku
G1000
supplier
Orange 1
specs link
Click here

0.09Kw (1/8HP) 2Pole 3Phase M56 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:2850rpm, Full Load Current@400V:0.3amps
Shaft size:9mm, Weight:3.4kg
Drive end bearing 6201 CM ZZ
Non-drive end bearing 6201 CM ZZ 56

Back to Top

sku
G1003
supplier
Orange 1
specs link
Click here

0.14Kw (1/5HP) 2Pole 3Phase M56 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:2800rpm, Full Load Current@400V:0.58amps
Shaft size:9mm, Weight:3.4kg
Drive end bearing 6201 CM ZZ
Non-drive end bearing 6201 CM ZZ 56

Back to Top

sku
G1006
supplier
Orange 1
specs link
Click here

0.18Kw (1/4HP) 2Pole 3Phase M63 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:2810rpm, Full Load Current@400V:0.52amps
Shaft size:11mm, Weight:4.1kg
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1009
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 2Pole 3Phase M63 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:2830rpm, Full Load Current@400V:0.74amps
Shaft size:11mm, Weight:4.4kg
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1012
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 2Pole 3Phase M71 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:2830rpm, Full Load Current@400V:0.98amps
Shaft size:14mm, Weight:5.8kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1015
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 2Pole 3Phase M71 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:2800rpm, Full Load Current@400V:1.33amps
Shaft size:14mm, Weight:6.5kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1090
supplier
Orange 1
specs link
Click here

0.09Kw (1/8HP) 4Pole 3Phase M56 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:1365rpm, Full Load Current@400V:0.4amps
Shaft size:9mm, Weight:3.1kg
Drive end bearing 6201 CM ZZ
Non-drive end bearing 6201 CM ZZ

Back to Top

sku
G1093
supplier
Orange 1
specs link
Click here

0.10Kw (1/8HP) 4Pole 3Phase M56 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Shaft size:9mm, Weight:3.5kg
Drive end bearing 6201 CM ZZ
Non-drive end bearing 6201 CM ZZ

Back to Top

sku
G1095
supplier
Orange 1
specs link
Click here

0.12Kw (1/6HP) 4Pole 3Phase M63 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Shaft size:11mm, Weight:4kg
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1096
supplier
Orange 1
specs link
Click here

0.14Kw (1/5HP) 4Pole 3Phase M63 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:1360rpm, Full Load Current@400V:0.55amps
Shaft size:11mm, Weight:4kg
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1099
supplier
Orange 1
specs link
Click here

0.18Kw (1/4HP) 4Pole 3Phase M63 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:1375rpm, Full Load Current@400V:0.65amps
Shaft size:11mm, Weight:4.6kg
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1101
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 4Pole 3Phase M63 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:1365rpm, Full Load Current@400V:0.88amps
Shaft size:11mm, Weight:5kg
Non Standard Frame Size
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1102
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 4Pole 3Phase M71 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:1410rpm, Full Load Current@400V:0.83amps
Shaft size:14mm, Weight:6kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1105
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 4Pole 3Phase M71 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:1380rpm, Full Load Current@400V:1.1amps
Shaft size:14mm, Weight:6.6kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1108
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 4Pole 3Phase M71 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:1355rpm, Full Load Current@400V:1.5amps
Shaft size:14mm, Weight:7.7kg
Non Standard Frame Size
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1111
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 4Pole 3Phase M80 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:1410rpm, Full Load Current@400V:1.5amps
Shaft size:19mm, Weight:8kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1174
supplier
Orange 1
specs link
Click here

0.12Kw (1/6HP) 6Pole 3Phase M63 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:860rpm, Full Load Current@400V:0.78amps
Shaft size:11mm, Weight:5kg
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1177
supplier
Orange 1
specs link
Click here

0.18Kw (1/4HP) 6Pole 3Phase M71 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:900rpm, Full Load Current@400V:0.80amps
Shaft size:14mm, Weight:6.6kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1180
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 6Pole 3Phase M71 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:910rpm, Full Load Current@400V:1.06amps
Shaft size:14mm, Weight:7.7kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1183
supplier
Orange 1
specs link
Click here

0.37Kw (1/4HP) 6Pole 3Phase M80 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:915rpm, Full Load Current@400V:1.25amps
Shaft size:19mm, Weight:8.3kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1186
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 6Pole 3Phase M80 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:900rpm, Full Load Current@400V:1.65amps
Shaft size:19mm, Weight:10kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1225
supplier
Orange 1
specs link
Click here

0.135Kw (1/5HP) 8Pole 3Phase M71 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:660rpm, Full Load Current@400V:0.77amps
Shaft size:14mm, Weight:7.5kg

Back to Top

sku
G1228
supplier
Orange 1
specs link
Click here

0.18Kw (1/4HP) 8Pole 3Phase M80 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:690rpm, Full Load Current@400V:0.96amps
Shaft size:19mm, Weight:8.7kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1231
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 8Pole 3Phase M80 Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:650rpm, Full Load Current@400V:1amps
Shaft size:19mm, Weight:10kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1234
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 8Pole 3Phase M90S Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:660rpm, Full Load Current@400V:1.5amps
Shaft size:24mm, Weight:12.6kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1237
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 8Pole 3Phase M90L Aluminium

A range of Italian manufactured three phase metric frame, aluminium motors up to 0.55kw Suitable for use in safe areas and all mountings including rod or pad.
Full Load Speed:680rpm, Full Load Current@400V:2.02amps
Shaft size:24mm, Weight:14.3kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1534
supplier
Orange 1
specs link
Click here

0.09Kw (1/8HP) 2Pole 1Phase M56 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Shaft size:9mm, Weight:3.3kg
Drive end bearing 6201 CM ZZ
Non-drive end bearing 6201 CM ZZ 56

Back to Top

sku
G1537
supplier
Orange 1
specs link
Click here

0.11Kw (1/7HP) 2Pole 1Phase M56 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2680rpm, Full Load Current@230V:1amps
Shaft size:9mm, Weight:3.3kg
Drive end bearing 6201 CM ZZ
Non-drive end bearing 6201 CM ZZ 56

Back to Top

sku
G1540
supplier
Orange 1
specs link
Click here

0.18Kw (1/4HP) 2Pole 1Phase M63 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2730rpm, Full Load Current@230V:1.4amps
Shaft size:11mm, Weight:4.4kg
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1543
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 2Pole 1Phase M63 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2750rpm, Full Load Current@230V:2.1amps
Shaft size:11mm, Weight:4.9kg
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1546
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 2Pole 1Phase M71 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2730rpm, Full Load Current@230V:3.4amps
Shaft size:14mm, Weight:6.6kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1549
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 2Pole 1Phase M71 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2730rpm, Full Load Current@230V:4.3amps
Shaft size:14mm, Weight:7.7kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1552
supplier
Orange 1
specs link
Click here

0.75Kw (1HP) 2Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2770rpm, Full Load Current@230V:5.1amps
Shaft size:19mm, Weight:10kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1555
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 2Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2750rpm, Full Load Current@230V:7.1amps
Shaft size:19mm, Weight:11.4kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1557
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 2Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2700rpm, Full Load Current@230V:9.8amps
Shaft size:19mm, Weight:12.3kg
Non standard Frame Size
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1560
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 2Pole 1Phase M90S PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2750rpm, Full Load Current@230V:9amps
Shaft size:24mm, Weight:14.7kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1566
supplier
Orange 1
specs link
Click here

2.2Kw (3HP) 2Pole 1Phase M90L PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2740rpm, Full Load Current@230V:13.4amps
Shaft size:24mm, Weight:16.8kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1572
supplier
Orange 1
specs link
Click here

3Kw (4HP) 2Pole 1Phase M100L PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors.
Shaft size:28mm, Weight:25kg
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1584
supplier
Orange 1
specs link
Click here

0.09Kw (1/8HP) 4Pole 1Phase M56 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1350rpm, Full Load Current@230V:0.9amps
Shaft size:9mm, Weight:3.3kg
Drive end bearing 6201 CM ZZ
Non-drive end bearing 6201 CM ZZ 56

Back to Top

sku
G1587
supplier
Orange 1
specs link
Click here

0.11Kw (1/7HP) 4Pole 1Phase M56 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1350rpm, Full Load Current@230V:1.2amps
Shaft size:9mm, Weight:4kg
Drive end bearing 6201 CM ZZ
Non-drive end bearing 6201 CM ZZ 56

Back to Top

sku
G1590
supplier
Orange 1
specs link
Click here

0.18Kw (1/4HP) 4Pole 1Phase M63 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1400rpm, Full Load Current@230V:1.5amps
Shaft size:11mm, Weight:4.7kg
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1593
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 4Pole 1Phase M71 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1330rpm, Full Load Current@230V:2amps
Shaft size:14mm, Weight:6.5kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1596
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 4Pole 1Phase M71 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1350rpm, Full Load Current@230V:3amps
Shaft size:14mm, Weight:7.7kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1599
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 4Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1360rpm, Full Load Current@230V:3.7amps
Shaft size:19mm, Weight:8.9kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1602
supplier
Orange 1
specs link
Click here

0.75Kw (1HP) 4Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1400rpm, Full Load Current@230V:5.3amps
Shaft size:19mm, Weight:10.4kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1605
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 4Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1400rpm, Full Load Current@230V:7.3amps
Shaft size:19mm, Weight:13kg
Non Standard Frame Size
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1608
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 4Pole 1Phase M90S PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1380rpm, Full Load Current@230V:6.7amps
Shaft size:24mm, Weight:13.3kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1611
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 4Pole 1Phase M90L PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1360rpm, Full Load Current@230V:9.3amps
Shaft size:24mm, Weight:16.2kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1620
supplier
Orange 1
specs link
Click here

2.2Kw (3HP) 4Pole 1Phase M100L PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1350rpm, Full Load Current@230V:13amps
Shaft size:28mm, Weight:23.9kg
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1632
supplier
Orange 1
specs link
Click here

0.18Kw (1/4HP) 6Pole 1Phase M71 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:920rpm, Full Load Current@230V:1.8amps
Shaft size:14mm, Weight:7kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1635
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 6Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:940rpm, Full Load Current@230V:2.5amps
Shaft size:19mm, Weight:8.5kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1638
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 6Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:920rpm, Full Load Current@230V:3.3amps
Shaft size:19mm, Weight:10kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1647
supplier
Orange 1
specs link
Click here

0.75Kw (1HP) 6Pole 1Phase M90L PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:945rpm, Full Load Current@230V:5.8amps
Shaft size:24mm, Weight:14.5kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1650
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 6Pole 1Phase M90L PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:930rpm, Full Load Current@230V:8.3amps
Shaft size:24mm, Weight:17kg
Non Standard Frame Size
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1700
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 2Pole 1Phase M71 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2730rpm, Full Load Current@230V:3.4amps
Shaft size:14mm, Weight:7kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1701
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 2Pole 1Phase M71 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2730rpm, Full Load Current@230V:4.3amps
Shaft size:14mm, Weight:8.3kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1702
supplier
Orange 1
specs link
Click here

0.75Kw (1HP) 2Pole 1Phase M80 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2770rpm, Full Load Current@230V:5.1amps
Shaft size:19mm, Weight:10kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1703
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 2Pole 1Phase M80 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2710rpm, Full Load Current@230V:7amps
Shaft size:19mm, Weight:11.8kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1704
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 2Pole 1Phase M80 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2700rpm, Full Load Current@230V:9.8amps
Shaft size:19mm, Weight:12.5kg
Non Standard Frame Size
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1705
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 2Pole 1Phase M90S CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2750rpm, Full Load Current@230V:9amps
Shaft size:24mm, Weight:15kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1707
supplier
Orange 1
specs link
Click here

2.2Kw (3HP) 2Pole 1Phase M90L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2740rpm, Full Load Current@230V:13.4amps
Shaft size24mm, Weight:16.8kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1708
supplier
Orange 1
specs link
Click here

2.5Kw (3 1/3HP) 2Pole 1Phase M100L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2850rpm, Full Load Current@230V:14.7amps
Shaft size28mm, Weight:22.4kg
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1709
supplier
Orange 1
specs link
Click here

3Kw (4HP) 2Pole 1Phase M100 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Shaft size28mm
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1716
supplier
Orange 1
specs link
Click here

0.18Kw (1/4HP) 4Pole 1Phase M63 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Shaft size:11mm
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1718
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 4Pole 1Phase M71 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Shaft size:14mm
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1720
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 4Pole 1Phase M71 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1350rpm, Full Load Current@230V:3amps
Shaft size:14mm, Weight:8kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1721
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 4Pole 1Phase M80 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1360rpm, Full Load Current@230V:3.7amps
Shaft size:19mm, Weight:9kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1722
supplier
Orange 1
specs link
Click here

0.75Kw (1HP) 4Pole 1Phase M80 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1400rpm, Full Load Current@230V:5.3amps
Shaft size:19mm, Weight:10.4kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1723
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 4Pole 1Phase M90S CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1380rpm, Full Load Current@230V:6.7amps
Shaft size:24mm, Weight:13.4kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1724
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 4Pole 1Phase M90L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1360rpm, Full Load Current@230V:9.3amps
Shaft size24mm, Weight:16.2kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1725
supplier
Orange 1
specs link
Click here

1.8Kw (2 1/2HP) 4Pole 1Phase M90L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1360rpm, Full Load Current@230V:12.1amps
Shaft size24mm, Weight:18.2kg
Drive end bearing 6205CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1727
supplier
Orange 1
specs link
Click here

2.2Kw (3HP) 4Pole 1Phase M100L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1350rpm, Full Load Current@230V:13amps
Shaft size28mm, Weight:24kg
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1740
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 6Pole 1Phase M80 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:920rpm, Full Load Current@230V:3amps
Shaft size:19mm, Weight:10kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1741
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 6Pole 1Phase M90S CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:910rpm, Full Load Current@230V:4.3amps
Shaft size:24mm, Weight:13kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1742
supplier
Orange 1
specs link
Click here

0.75Kw (1HP) 6Pole 1Phase M90L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:945rpm, Full Load Current@230V:5.8amps
Shaft size:24mm, Weight:14.9kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1743
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 6Pole 1Phase M90L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:930rpm, Full Load Current@230V:8.3amps
Non Standard Frame Size
Shaft size:24mm, Weight:17kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1744
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 6Pole 1Phase M100L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:935rpm, Full Load Current@230V:8.1amps
Shaft size:28mm, Weight:19kg
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1755
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 6Pole 1Phase M100L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:930rpm, Full Load Current@230V:10.6amps
Shaft size:28mm, Weight:21kg
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1900
supplier
Orange 1
specs link
Click here

Low Centre, FPC Brake, 3phase 2pole

Back to Top

sku
IMGE1006
supplier
Crompton Greaves
specs link
Click here

0.18Kw (1/4hp) 2Pole 3phase GD63 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2810rpm, Full Load Current@400V:0.62amps
Efficiency@Full Load:69.0%, Shaft size:11mm, Weight:5.5kg
Drive end bearing 6202-2Z
Non-drive end bearing 6202-2Z
Drive end oil seal 15 x 24 x 5
Non drive end oil seal 15 x 24 x 5

Back to Top

sku
IMGE1009
supplier
Crompton Greaves
specs link
Click here

0.25Kw (1/3hp) 2Pole 3phase GD63 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2810rpm, Full Load Current@400V:0.72amps
Efficiency@Full Load:70.0%, Shaft size:11mm, Weight:5.5kg
Drive end bearing 6202-2Z
Non-drive end bearing 6202-2Z
Drive end oil seal 15 x 24 x 5
Non drive end oil seal 15 x 24 x 5

Back to Top

sku
IMGE1012
supplier
Crompton Greaves
specs link
Click here

0.37Kw (1/2hp) 2Pole 3phase GD71 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2815rpm, Full Load Current@400V:0.88amps
Efficiency@Full Load:73.0%, Shaft size:14mm, Weight:7kg
Drive end bearing 6003-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 17 x 28 x 6
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1015
supplier
Crompton Greaves
specs link
Click here

0.55Kw (3/4hp) 2Pole 3phase GD71 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2820rpm, Full Load Current@400V:1.23amps
Efficiency@Full Load:76.0%, Shaft size:14mm, Weight:7kg
Drive end bearing 6003-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 17 x 28 x 6
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1018
supplier
Crompton Greaves
specs link
Click here

0.75Kw (1hp) 2Pole 3phase GD80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2823rpm, Full Load Current@400V:1.53amps
Efficiency@Full Load:80.33%, Shaft size:19mm, Weight:10kg
Slide Rails to suit:M0809
Drive end bearing 6204-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 20 x 30 x 7
Non drive end oil seal 15 x 24 x 5

Back to Top

sku
IMGE1021
supplier
Crompton Greaves
specs link
Click here

1.1Kw (1 1/2hp) 2Pole 3phase GD80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2870rpm, Full Load Current@400V:2.38amps
Efficiency@Full Load:82.82%, Shaft size:19mm, Weight:10kg
Slide Rails to suit:M0809
Drive end bearing 6204-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 20 x 30 x 7
Non drive end oil seal 15 x 24 x 5

Back to Top

sku
IMGE1027
supplier
Crompton Greaves
specs link
Click here

1.5Kw (2hp) 2Pole 3phase GD90S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2832rpm, Full Load Current@400V:3.1amps
Efficiency@Full Load:84.10%, Shaft size:24mm, Weight:13.5kg
Slide Rails to suit:M0809
Drive end bearing 6205-2Z
Non-drive end bearing 6203-2Z
Drive end oil seal 25 x 35 x7
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1036
supplier
Crompton Greaves
specs link
Click here

2.2Kw (3hp) 2Pole 3phase GD90L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2834rpm, Full Load Current@400V:4.4amps
Efficiency@Full Load:85.69%, Shaft size:24mm, Weight:15.5kg
Slide Rails to suit:M0809
Drive end bearing 6205-2Z
Non-drive end bearing 6203-2Z
Drive end oil seal 25 x 35 x7
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1042
supplier
Crompton Greaves
specs link
Click here

3Kw (4hp) 2Pole 3phase GD100L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2890rpm, Full Load Current@400V:5.48amps
Efficiency@Full Load:86.84%, Shaft size:28mm, Weight:27kg
Slide Rails to suit:M1013
Drive end bearing 6206-2Z
Non-drive end bearing 6205-2Z
Drive end oil seal 30 x 42 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1051
supplier
Crompton Greaves
specs link
Click here

4Kw (5 1/2hp) 2Pole 3phase GD112M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2880rpm, Full Load Current@400V:7.3amps
Efficiency@Full Load:87.67%, Shaft size:28mm, Weight:33kg
Slide Rails to suit:M1013
Drive end bearing 6206-2Z
Non-drive end bearing 6205-2Z
Drive end oil seal 30 x 42 x7

Back to Top

sku
IMGE1057
supplier
Crompton Greaves
specs link
Click here

5.5Kw (7 1/2hp) 2Pole 3phase GD132S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2912rpm, Full Load Current@400V:9.71amps
Efficiency@Full Load:89.97%, Shaft size:38mm, Weight:50kg
Slide Rails to suit:M1013
Drive end bearing 6208-2Z
Non-drive end bearing 6305-2Z
Drive end oil seal 40 x 52 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1063
supplier
Crompton Greaves
specs link
Click here

7.5Kw (10hp) 2Pole 3phase GD132S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:2880rpm, Full Load Current@400V:13.3amps
Efficiency@Full Load:89.75%, Shaft size:38mm, Weight:50kg
Slide Rails to suit:M1013
Drive end bearing 6208-2Z
Non-drive end bearing 6305-2Z
Drive end oil seal 40 x 52 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1099
supplier
Crompton Greaves
specs link
Click here

0.18Kw (1/4hp) 4Pole 3phase GD63 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1370rpm, Full Load Current@400V:0.63amps
Efficiency@Full Load:62.0%, Shaft size:11mm, Weight:5.5kg
Drive end bearing 6202-2Z
Non-drive end bearing 6202-2Z
Drive end oil seal 15 x 24 x 5
Non drive end oil seal 15 x 24 x 5

Back to Top

sku
IMGE1102
supplier
Crompton Greaves
specs link
Click here

0.25Kw (1/3hp) 4Pole 3phase GD71 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1400rpm, Full Load Current@400V:0.80amps
Efficiency@Full Load:69.0%, Shaft size:14mm, Weight:7kg
Drive end bearing 6003-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 17 x 28 x 6
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1105
supplier
Crompton Greaves
specs link
Click here

0.37Kw (1/2hp) 4Pole 3phase GD71 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1410rpm, Full Load Current@400V:1.11amps
Efficiency@Full Load:71.0%, Shaft size:14mm, Weight:7kg
Drive end bearing 6003-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 17 x 28 x 6
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1111
supplier
Crompton Greaves
specs link
Click here

0.55Kw (3/4hp) 4Pole 3phase GD80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1410rpm, Full Load Current@400V:1.58amps
Efficiency@Full Load:75.0%, Shaft size:19mm, Weight:10kg
Slide Rails to suit:M0809
Drive end bearing 6204-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 20 x 30 x7
Non drive end oil seal 15 x 24 x 5

Back to Top

sku
IMGE1114
supplier
Crompton Greaves
specs link
Click here

0.75Kw (1hp) 4Pole 3phase GD80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1413rpm, Full Load Current@400V:1.68amps
Efficiency@Full Load:82.5%, Shaft size:19mm, Weight:10kg
Slide Rails to suit:M0809
Drive end bearing 6204-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 20 x 30 x 7
Non drive end oil seal 15 x 24 x 5

Back to Top

sku
IMGE1117
supplier
Crompton Greaves
specs link
Click here

1.1Kw (1 1/2hp) 4Pole 3phase GD90S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1415rpm, Full Load Current@400V:2.43amps
Efficiency@Full Load:83.68%, Shaft size:24mm, Weight:13.5kg
Slide Rails to suit:M0809
Drive end bearing 6205-2Z
Non-drive end bearing 6203-2Z
Drive end oil seal 25 x 35 x7
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1123
supplier
Crompton Greaves
specs link
Click here

1.5Kw (2hp) 4Pole 3phase GD90L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1414rpm, Full Load Current@400V:3amps
Efficiency@Full Load:84.91%, Shaft size:24mm, Weight:15.5kg
Slide Rails to suit:M0809
Drive end bearing 6205-2Z
Non-drive end bearing 6203-2Z
Drive end oil seal 25 x 35 x7
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1129
supplier
Crompton Greaves
specs link
Click here

2.2Kw (3hp) 4Pole 3phase GD100L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1439rpm, Full Load Current@400V:4.3amps
Efficiency@Full Load:86.68%, Shaft size:28mm, Weight:27kg
Slide Rails to suit:M1013
Drive end bearing 6206-2Z
Non-drive end bearing 6205-2Z
Drive end oil seal 30 x 42 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1132
supplier
Crompton Greaves
specs link
Click here

3Kw (4hp) 4Pole 3phase GD100L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1415rpm, Full Load Current@400V:6amps
Efficiency@Full Load:87.74%, Shaft size:28mm, Weight:27kg
Slide Rails to suit:M1013
Drive end bearing 6206-2Z
Non-drive end bearing 6205-2Z
Drive end oil seal 30 x 42 x7
Non drive end oil seal 25 x 37 x 5

Back to Top

sku
IMGE1138
supplier
Crompton Greaves
specs link
Click here

4Kw (5 1/2hp) 4Pole 3phase GD112M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1447rpm, Full Load Current@400V:7.6amps
Efficiency@Full Load:87.77%, Shaft size:28mm, Weight:33kg
Slide Rails to suit:M1013
Drive end bearing 6206-2Z
Non-drive end bearing 6205-2Z
Drive end oil seal 30 x 42 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1144
supplier
Crompton Greaves
specs link
Click here

5.5Kw (7 1/2hp) 4Pole 3phase GD132S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1453rpm, Full Load Current@400V:10.59amps
Efficiency@Full Load:89.22%, Shaft size:38mm, Weight:50kg
Slide Rails to suit:M1013
Drive end bearing 6208-2Z
Non-drive end bearing 6305-2Z
Drive end oil seal 40 x 52 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1147
supplier
Crompton Greaves
specs link
Click here

7.5Kw (10hp) 4Pole 3phase GD132M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:1449rpm, Full Load Current@400V:13.83amps
Efficiency@Full Load:90.27%, Shaft size:38mm, Weight:56kg
Slide Rails to suit:M1013
Drive end bearing 6208-2Z
Non-drive end bearing 6305-2Z
Drive end oil seal 40 x 52 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1177
supplier
Crompton Greaves
specs link
Click here

0.18Kw (1/4hp) 6Pole 3phase GD71 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:910rpm, Full Load Current@400V:10.75amps
Efficiency@Full Load:61.0%, Shaft size:14mm, Weight:7kg
Drive end bearing 6003-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 17 x 28 x 6
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1180
supplier
Crompton Greaves
specs link
Click here

0.25Kw (1/3hp) 6Pole 3phase GD71 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:920rpm, Full Load Current@400V:1.06amps
Efficiency@Full Load:61.0%, Shaft size:14mm, Weight:7kg
Drive end bearing 6003-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 17 x 28 x 6
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1183
supplier
Crompton Greaves
specs link
Click here

0.37Kw (1/2hp) 6Pole 3phase GD80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:920rpm, Full Load Current@400V:1.27amps
Efficiency@Full Load:69.0%, Shaft size:19mm, Weight:10kg
Slide Rails to suit:M0809
Drive end bearing 6204-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 20 x 30 x 7
Non drive end oil seal 15 x 24 x 5

Back to Top

sku
IMGE1186
supplier
Crompton Greaves
specs link
Click here

0.55Kw (3/4hp) 6Pole 3phase GD80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:920rpm, Full Load Current@400V:1.77amps
Efficiency@Full Load:71.0%, Shaft size:19mm, Weight:10kg
Slide Rails to suit:M0809
Drive end bearing 6204-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 20 x 30 x 7
Non drive end oil seal 15 x 24 x 5

Back to Top

sku
IMGE1189
supplier
Crompton Greaves
specs link
Click here

0.75Kw (1hp) 6Pole 3phase GD90S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:920rpm, Full Load Current@400V:1.87amps
Efficiency@Full Load:78.89%, Shaft size:24mm, Weight:13.5kg
Slide Rails to suit:M0809
Drive end bearing 6205-2Z
Non-drive end bearing 6203-2Z
Drive end oil seal 25 x 35 x76
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1192
supplier
Crompton Greaves
specs link
Click here

1.1Kw (1 1/2hp) 6Pole 3phase GD90L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:940rpm, Full Load Current@400V:2.65amps
Efficiency@Full Load:79.69%, Shaft size:24mm, Weight:15.5kg
Slide Rails to suit:M0809
Drive end bearing 6205-2Z
Non-drive end bearing 6203-2Z
Drive end oil seal 25 x 35 x7
Non drive end oil seal 157x 28 x 6

Back to Top

sku
IMGE1195
supplier
Crompton Greaves
specs link
Click here

1.5Kw (2hp) 6Pole 3phase GD100L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:950rpm, Full Load Current@400V:5.05amps
Efficiency@Full Load:84.79%, Shaft size:28mm, Weight:27kg
Slide Rails to suit:M1013
Drive end bearing 6206-2Z
Non-drive end bearing 6205-2Z
Drive end oil seal 30 x 30 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1198
supplier
Crompton Greaves
specs link
Click here

2.2Kw (3hp) 6Pole 3phase GD112M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:950rpm, Full Load Current@400V:5.05amps
Efficiency@Full Load:84.79%, Shaft size:28mm, Weight:33kg
Slide Rails to suit:M1013
Drive end bearing 6206-2Z
Non-drive end bearing 6205-2Z
Drive end oil seal 30 x 42x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1201
supplier
Crompton Greaves
specs link
Click here

3Kw (4hp) 6Pole 3phase GD132S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:965rpm, Full Load Current@400V:6.86amps
Efficiency@Full Load:85.7%, Shaft size:38mm, Weight:50kg
Slide Rails to suit:M1013
Drive end bearing 6208-2Z
Non-drive end bearing 6305-2Z
Drive end oil seal 40 x 52 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1204
supplier
Crompton Greaves
specs link
Click here

4Kw (5 1/2hp) 6Pole 3phase GD132M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:958rpm, Full Load Current@400V:9.05amps
Efficiency@Full Load:88.09%, Shaft size:38mm, Weight:56kg
Slide Rails to suit:M1013
Drive end bearing 6208-2Z
Non-drive end bearing 6305-2Z
Drive end oil seal 40 x 52 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1207
supplier
Crompton Greaves
specs link
Click here

5.5Kw (7 1/2hp) 6Pole 3phase GD132M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:956rpm, Full Load Current@400V:11.63amps
Efficiency@Full Load:88.82%, Shaft size:38mm, Weight:56kg
Slide Rails to suit:M1013
Drive end bearing 6208-2Z
Non-drive end bearing 6305-2Z
Drive end oil seal 40 x 52 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1228
supplier
Crompton Greaves
specs link
Click here

0.18Kw (1/4hp) 8Pole 3phase GD80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:695rpm, Full Load Current@400V:0.96amps
Efficiency@Full Load:55.0%, Shaft size:19mm, Weight:10kg
Slide Rails to suit:M0809
Drive end bearing 6204-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 20 x 30 x 7
Non drive end oil seal 15 x 24 x 5

Back to Top

sku
IMGE1231
supplier
Crompton Greaves
specs link
Click here

0.25Kw (1/3hp) 8Pole 3phase GD80 Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:695rpm, Full Load Current@400V:1.20amps
Efficiency@Full Load:59.0%, Shaft size:19mm, Weight:10kg
Slide Rails to suit:M0809
Drive end bearing 6204-2Z
Non-drive end bearing 6003-2Z
Drive end oil seal 20 x 30 x 7
Non drive end oil seal 15 x 24 x 5

Back to Top

sku
IMGE1234
supplier
Crompton Greaves
specs link
Click here

0.37Kw (1/2hp) 8Pole 3phase GD90S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:700rpm, Full Load Current@400V:1.63amps
Efficiency@Full Load:62.0%, Shaft size:24mm, Weight:13.5kg
Slide Rails to suit:M0809
Drive end bearing 6205-2Z
Non-drive end bearing 6203-2Z
Drive end oil seal 25 x 35 x76
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1237
supplier
Crompton Greaves
specs link
Click here

0.55Kw (3/4hp) 8Pole 3phase GD90L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:680rpm, Full Load Current@400V:2.30amps
Efficiency@Full Load:64.0%, Shaft size:24mm, Weight:15.5kg
Slide Rails to suit:M0809
Drive end bearing 6205-2Z
Non-drive end bearing 6203-2Z
Drive end oil seal 25 x 35 x76
Non drive end oil seal 17 x 28 x 6

Back to Top

sku
IMGE1240
supplier
Crompton Greaves
specs link
Click here

0.75Kw (1hp) 8Pole 3phase GD100L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:704rpm, Full Load Current@400V:2.51amps
Efficiency@Full Load:75.11%, Shaft size:28mm, Weight:27kg
Slide Rails to suit:M1013
Drive end bearing 6206-2Z
Non-drive end bearing 6205-2Z
Drive end oil seal 30 x 30 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1243
supplier
Crompton Greaves
specs link
Click here

1.1Kw (1 1/2hp) 8Pole 3phase GD100L Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:692rpm, Full Load Current@400V:3.36amps
Efficiency@Full Load:77.92%, Shaft size:28mm, Weight:27kg
Slide Rails to suit:M1013
Drive end bearing 6206-2Z
Non-drive end bearing 6205-2Z
Drive end oil seal 30 x 30 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1246
supplier
Crompton Greaves
specs link
Click here

1.5Kw (2hp) 8Pole 3phase GD112M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:690rpm, Full Load Current@400V:3.81amps
Efficiency@Full Load:78.0%, Shaft size:28mm, Weight:33kg
Slide Rails to suit:M1013
Drive end bearing 6206-2Z
Non-drive end bearing 6205-2Z
Drive end oil seal 30 x 42x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1249
supplier
Crompton Greaves
specs link
Click here

2.2Kw (3hp) 8Pole 3phase GD132S Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:720rpm, Full Load Current@400V:6.1amps
Efficiency@Full Load:84.35%, Shaft size:38mm, Weight:50kg
Slide Rails to suit:M1013
Drive end bearing 6208-2Z
Non-drive end bearing 6305-2Z
Drive end oil seal 40 x 52 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
IMGE1252
supplier
Crompton Greaves
specs link
Click here

3Kw (4hp) 8Pole 3phase GD132M Aluminium

Engineering excellence has been complimented by careful attention to aesthetic design. The smooth lines and attractive colour give an excellent appearance to enhance modern machinery designs without compromising motor efficiency and performance.
Full Load Speed:718rpm, Full Load Current@400V:7.8amps
Efficiency@Full Load:84.96%, Shaft size:38mm, Weight:56kg
Slide Rails to suit:M1013
Drive end bearing 6208-2Z
Non-drive end bearing 6305-2Z
Drive end oil seal 40 x 52 x7
Non drive end oil seal 25 x 37 x 7

Back to Top

sku
NDP14037
supplier
BROOK MTL
specs link
Click here

0.37Kw (1/2HP) 4Pole, 1phase, B56, Drip Proof, Cap Start/Induction Run

Single phase, inch dimension (Imperial B56 Frame), rolled steel shell. General purpose motor with standard 5/8” shaft. Flange mount available. Motors are fitted with a thermal re-settable overload.
Shaft Size:5/8" Weight:15kgs

Back to Top

sku
NSP14025
supplier
BROOK MTL
specs link
Click here

0.25Kw (1/3HP) 4Pole, 1phase, B56, Split Phase

Single phase, inch dimension (Imperial B56 Frame), rolled steel shell. General purpose motor with standard 5/8” shaft. Flange mount available. Motors are fitted with a thermal re-settable overload.
Shaft Size:5/8" Weight:15kgs

Back to Top

sku
NTE12170BS
supplier
BROOK MTL
specs link
Click here

BRICK SAW MOTOR 1.7KW 2.5HP 2POLE 1PHASE

A robust replacement heavy duty electric motor especially designed for use with brick and paving cutting machines.

Back to Top

sku
NTE14037
supplier
BROOK MTL
specs link
Click here

0.37Kw (1/2HP) 4Pole, 1phase, B56, Totally Enclosed, Cap Start/Induction Run

Single phase, inch dimension (Imperial B56 Frame), rolled steel shell. General purpose motor with standard 5/8” shaft. Flange mount available. Motors are fitted with a thermal re-settable overload.
Shaft Size:5/8" Weight:15kgs

Back to Top

sku
NTE14075
supplier
BROOK MTL
specs link
Click here

0.75Kw (1HP) 4Pole, 1phase, B56, Totally Enclosed, Cap Start/Induction Run

Single phase, inch dimension (Imperial B56 Frame), rolled steel shell. General purpose motor with standard 5/8” shaft. Flange mount available. Motors are fitted with a thermal re-settable overload.
Shaft Size:5/8" Weight:15kgs

Back to Top

sku
OX2E250 OX4E250 OX4D250
supplier
RMS
specs link
Click here

BASKET FAN, AXIAL FAN, CONDENSOR FAN 2E250 4E250 4D250

Induced and Forced Draft

Back to Top

sku
PR1401
supplier
BROOK MTL
specs link
Click here

0.10KW 4POLE 1PHASE (A) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 0.64amps, Shaft Size:14mm, Weight: 3.4kg

Back to Top

sku
PR1602
supplier
BROOK MTL
specs link
Click here

0.15KW 6POLE 1PHASE (B) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 0.95amps, Shaft Size:14mm, Weight: 4.5kg

Back to Top

sku
PR1603
supplier
BROOK MTL
specs link
Click here

0.25KW 6POLE 1PHASE (B) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 1.53amps, Shaft Size:14mm, Weight: 6.9kg

Back to Top

sku
PR1606
supplier
BROOK MTL
specs link
Click here

0.56KW 6POLE 1PHASE (D2) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 3.22amps, Shaft Size:24mm, Weight: 13kg

Back to Top

sku
PR1802
supplier
BROOK MTL
specs link
Click here

0.15KW 8POLE 1PHASE (B) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 1.20amps, Shaft Size:14mm, Weight: 6.3kg

Back to Top

sku
PR1803
supplier
BROOK MTL
specs link
Click here

0.18KW 8POLE 1PHASE (B) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 1.1amps, Shaft Size:14mm, Weight: 6.5kg

Back to Top

sku
PR1805
supplier
BROOK MTL
specs link
Click here

0.37KW 8POLE 1PHASE (C) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 1.8amps, Shaft Size:14mm, Weight: 6.9kg

Back to Top

sku
QW1703
supplier
QW
specs link
Click here

1.1Kw (1 1/2HP) 2Pole 1Phase H80 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
QW1705
supplier
QW
specs link
Click here

1.5Kw (2HP) 2Pole 1Phase H90 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
QW1707
supplier
QW
specs link
Click here

2.2Kw (3HP) 2Pole 1Phase H100 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
QW1722
supplier
QW
specs link
Click here

0.75Kw (1HP) 4Pole 1Phase H80 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
QW1723
supplier
QW
specs link
Click here

1.1Kw (1 1/2HP) 4Pole 1Phase H90 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
QW1724
supplier
QW
specs link
Click here

1.5Kw (2HP) 4Pole 1Phase H90 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
QW1727
supplier
QW
specs link
Click here

2.2Kw (3HP) 4Pole 1Phase H100 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
SM180-3
supplier
BROOK MTL
specs link
Click here

New Zealand Spit Motor (Rotisserie) Single Phase

This Spit Motor is suitable for industrial type rotisseries. The units use 230V AC domestic supply and are capable of rotating a balanced 40kg load.
Use of a R.C.D. protection device is advised.

Back to Top