sku
DL120TYD
supplier
ZWDM
specs link
Click here

120TYD 1 & 3 PHASE, LOW SPEED, GEARLESS MOTOR

The DL Series of permanent magnet AC synchronous motors are a unique design low speed motor with a worldwide patent. These motors are extremely efficient with regard to input current and output torques. A capacitor, resistor combination is incorporated in the single phase versions and reverse switching is easily achieved. Refer to specs link for further information, speed & torques

Back to Top

sku
DL70TYD
supplier
ZWDM
specs link
Click here

70TYD 1 & 3 PHASE, LOW SPEED, GEARLESS MOTOR

The DL Series of permanent magnet AC synchronous motors are a unique design low speed motor with a worldwide patent. These motors are extremely efficient with regard to input current and output torques. A capacitor, resistor combination is incorporated in the single phase versions and reverse switching is easily achieved. Refer to specs link for further information, speed & torques.

Back to Top

sku
DL90TYD
supplier
ZWDM
specs link
Click here

90TYD 1 & 3 PHASE, LOW SPEED, GEARLESS MOTOR

The DL Series of permanent magnet AC synchronous motors are a unique design low speed motor with a worldwide patent. These motors are extremely efficient with regard to input current and output torques. A capacitor, resistor combination is incorporated in the single phase versions and reverse switching is easily achieved. Refer to specs link for further information, speed & torques

Back to Top

sku
FC1534
supplier
CEMP s.r.l
specs link
Click here

0.10Kw 2Pole 1phase 63A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase are AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2750, Full Load Current@230V:1.3amps
Shaft Size:11mm, Weight:16kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1540
supplier
CEMP s.r.l
specs link
Click here

0.15Kw 2Pole 1phase 63B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2750, Full Load Current@230V:1.3amps
Shaft Size:11mm, Weight:16kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1543
supplier
CEMP s.r.l
specs link
Click here

0.20Kw 2Pole 1phase 71A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2800, Full Load Current@230V:2.6amps
Shaft Size:14mm, Weight:19kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1546
supplier
CEMP s.r.l
specs link
Click here

0.40Kw 2Pole 1phase 71B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2730, Full Load Current@230V:2.9amps
Shaft Size:14mm, Weight:19kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1549
supplier
CEMP s.r.l
specs link
Click here

0.55Kw 2Pole 1phase 80A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2720, Full Load Current@230V:5.4amps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1552
supplier
CEMP s.r.l
specs link
Click here

0.75Kw 2Pole 1phase 80B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2790, Full Load Current@230V:5.3amps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1555
supplier
CEMP s.r.l
specs link
Click here

1.1Kw 2Pole 1phase 90S Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2750, Full Load Current@230V:7.8amps
Shaft Size:24mm, Weight:33kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1560
supplier
CEMP s.r.l
specs link
Click here

1.5Kw 2Pole 1phase 90L Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2800, Full Load Current@230V:8.9amps
Shaft Size:24mm, Weight:33kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1566
supplier
CEMP s.r.l
specs link
Click here

2.2Kw 2Pole 1phase 100LA Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2800, Full Load Current@230V:15.5amps
Shaft Size:28mm, Weight:46kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1572
supplier
CEMP s.r.l
specs link
Click here

3Kw 2Pole 1phase 100LB Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:2800, Full Load Current@230V:18amps
Shaft Size:28mm, Weight:46kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1584
supplier
CEMP s.r.l
specs link
Click here

0.09Kw 4Pole 1phase 63A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1360, Full Load Current@230V:1.1amps
Shaft Size:11mm, Weight:16kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1587
supplier
CEMP s.r.l
specs link
Click here

0.13Kw 4Pole 1phase 63B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1350, Full Load Current@230V:1.3amps
Shaft Size:11mm, Weight:16kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1590
supplier
CEMP s.r.l
specs link
Click here

0.15Kw 4Pole 1phase 71A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1380, Full Load Current@230V:1.7amps
Shaft Size:14mm, Weight:19kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1593
supplier
CEMP s.r.l
specs link
Click here

0.25Kw 4Pole 1phase 71B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1380, Full Load Current@230V:2.3amps
Shaft Size:14mm, Weight:19kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1596
supplier
CEMP s.r.l
specs link
Click here

0.35Kw 4Pole 1phase 80A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1410, Full Load Current@230V:3.3amps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1598
supplier
CEMP s.r.l
specs link
Click here

0.45Kw 4Pole 1phase 80B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1420, Full Load Current@230V:4.3amps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1599
supplier
CEMP s.r.l
specs link
Click here

0.55Kw 4Pole 1phase 80L Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1420, Full Load Current@230V:4.9mps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1602
supplier
CEMP s.r.l
specs link
Click here

0.75Kw 4Pole 1phase 90S Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1420, Full Load Current@230V:5.9amps
Shaft Size:24mm, Weight:33kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1608
supplier
CEMP s.r.l
specs link
Click here

1.1Kw 4Pole 1phase 90L Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1430, Full Load Current@230V:7.2amps
Shaft Size:24mm, Weight:33kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1610
supplier
CEMP s.r.l
specs link
Click here

1.3Kw 4Pole 1phase 100LA Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1370, Full Load Current@230V:8.1amps
Shaft Size:28mm, Weight:46kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1611
supplier
CEMP s.r.l
specs link
Click here

1.6Kw 4Pole 1phase 100LB Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:1400, Full Load Current@230V:10amps
Shaft Size:28mm, Weight:46kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1626
supplier
CEMP s.r.l
specs link
Click here

0.10Kw 6Pole 1phase 71A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:900, Full Load Current@230V:1.5amps
Shaft Size:11mm, Weight:19kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1629
supplier
CEMP s.r.l
specs link
Click here

0.15Kw 6Pole 1phase 71B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:850, Full Load Current@230V:1.4amps
Shaft Size:14mm, Weight:19kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1632
supplier
CEMP s.r.l
specs link
Click here

0.20Kw 6Pole 1phase 80A Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:910, Full Load Current@230V:2.7amps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1638
supplier
CEMP s.r.l
specs link
Click here

0.30Kw 6Pole 1phase 80B Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:930, Full Load Current@230V:3amps
Shaft Size:19mm, Weight:26kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1644
supplier
CEMP s.r.l
specs link
Click here

0.55Kw 6Pole 1phase 90S Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:920, Full Load Current@230V:4.3amps
Shaft Size:24mm, Weight:33kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1647
supplier
CEMP s.r.l
specs link
Click here

0.75Kw 6Pole 1phase 90L Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:910, Full Load Current@230V:6.1amps
Shaft Size:24mm, Weight:33kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
FC1653
supplier
CEMP s.r.l
specs link
Click here

1.1Kw 6Pole 1phase 100LB Flameproof EEx d

CEMP Flameproof motors are specifically designed for dangerous areas and zones. Our stock range of machines intended for use in potentially explosive atmospheres, is in compliance with the European directive 94/9/ex otherwise known as the “Atex Directive.”
Motors in single phase, are the AB10 type, EExd, IIB, T4, IP55.
Full Load Speed:920, Full Load Current@230V:8.0amps
Shaft Size:28mm, Weight:46kgs
NOTE: Single phase motors are P.S.C. type and have reduced starting torque, generally suitable for fan and centrifugal pump applications. The capacitor is supplied loose and should be fitted in a suitable enclosure as close as possible to the motor.

Back to Top

sku
G1534
supplier
Orange 1
specs link
Click here

0.09Kw (1/8HP) 2Pole 1Phase M56 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Shaft size:9mm, Weight:3.3kg
Drive end bearing 6201 CM ZZ
Non-drive end bearing 6201 CM ZZ 56

Back to Top

sku
G1537
supplier
Orange 1
specs link
Click here

0.11Kw (1/7HP) 2Pole 1Phase M56 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2680rpm, Full Load Current@230V:1amps
Shaft size:9mm, Weight:3.3kg
Drive end bearing 6201 CM ZZ
Non-drive end bearing 6201 CM ZZ 56

Back to Top

sku
G1540
supplier
Orange 1
specs link
Click here

0.18Kw (1/4HP) 2Pole 1Phase M63 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2730rpm, Full Load Current@230V:1.4amps
Shaft size:11mm, Weight:4.4kg
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1543
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 2Pole 1Phase M63 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2750rpm, Full Load Current@230V:2.1amps
Shaft size:11mm, Weight:4.9kg
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1546
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 2Pole 1Phase M71 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2730rpm, Full Load Current@230V:3.4amps
Shaft size:14mm, Weight:6.6kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1549
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 2Pole 1Phase M71 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2730rpm, Full Load Current@230V:4.3amps
Shaft size:14mm, Weight:7.7kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1552
supplier
Orange 1
specs link
Click here

0.75Kw (1HP) 2Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2770rpm, Full Load Current@230V:5.1amps
Shaft size:19mm, Weight:10kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1555
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 2Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2750rpm, Full Load Current@230V:7.1amps
Shaft size:19mm, Weight:11.4kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1557
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 2Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2700rpm, Full Load Current@230V:9.8amps
Shaft size:19mm, Weight:12.3kg
Non standard Frame Size
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1560
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 2Pole 1Phase M90S PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2750rpm, Full Load Current@230V:9amps
Shaft size:24mm, Weight:14.7kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1566
supplier
Orange 1
specs link
Click here

2.2Kw (3HP) 2Pole 1Phase M90L PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:2740rpm, Full Load Current@230V:13.4amps
Shaft size:24mm, Weight:16.8kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1572
supplier
Orange 1
specs link
Click here

3Kw (4HP) 2Pole 1Phase M100L PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors.
Shaft size:28mm, Weight:25kg
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1584
supplier
Orange 1
specs link
Click here

0.09Kw (1/8HP) 4Pole 1Phase M56 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1350rpm, Full Load Current@230V:0.9amps
Shaft size:9mm, Weight:3.3kg
Drive end bearing 6201 CM ZZ
Non-drive end bearing 6201 CM ZZ 56

Back to Top

sku
G1587
supplier
Orange 1
specs link
Click here

0.11Kw (1/7HP) 4Pole 1Phase M56 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1350rpm, Full Load Current@230V:1.2amps
Shaft size:9mm, Weight:4kg
Drive end bearing 6201 CM ZZ
Non-drive end bearing 6201 CM ZZ 56

Back to Top

sku
G1590
supplier
Orange 1
specs link
Click here

0.18Kw (1/4HP) 4Pole 1Phase M63 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1400rpm, Full Load Current@230V:1.5amps
Shaft size:11mm, Weight:4.7kg
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1593
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 4Pole 1Phase M71 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1330rpm, Full Load Current@230V:2amps
Shaft size:14mm, Weight:6.5kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1596
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 4Pole 1Phase M71 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1350rpm, Full Load Current@230V:3amps
Shaft size:14mm, Weight:7.7kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1599
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 4Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1360rpm, Full Load Current@230V:3.7amps
Shaft size:19mm, Weight:8.9kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1602
supplier
Orange 1
specs link
Click here

0.75Kw (1HP) 4Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1400rpm, Full Load Current@230V:5.3amps
Shaft size:19mm, Weight:10.4kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1605
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 4Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1400rpm, Full Load Current@230V:7.3amps
Shaft size:19mm, Weight:13kg
Non Standard Frame Size
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1608
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 4Pole 1Phase M90S PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1380rpm, Full Load Current@230V:6.7amps
Shaft size:24mm, Weight:13.3kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1611
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 4Pole 1Phase M90L PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1360rpm, Full Load Current@230V:9.3amps
Shaft size:24mm, Weight:16.2kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1620
supplier
Orange 1
specs link
Click here

2.2Kw (3HP) 4Pole 1Phase M100L PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:1350rpm, Full Load Current@230V:13amps
Shaft size:28mm, Weight:23.9kg
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1632
supplier
Orange 1
specs link
Click here

0.18Kw (1/4HP) 6Pole 1Phase M71 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:920rpm, Full Load Current@230V:1.8amps
Shaft size:14mm, Weight:7kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1635
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 6Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:940rpm, Full Load Current@230V:2.5amps
Shaft size:19mm, Weight:8.5kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1638
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 6Pole 1Phase M80 PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:920rpm, Full Load Current@230V:3.3amps
Shaft size:19mm, Weight:10kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1647
supplier
Orange 1
specs link
Click here

0.75Kw (1HP) 6Pole 1Phase M90L PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:945rpm, Full Load Current@230V:5.8amps
Shaft size:24mm, Weight:14.5kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1650
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 6Pole 1Phase M90L PSC Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. All mounting arrangements available. These motors are particularly suited to light loads on starting such as Axial Flow Fans, Saw Benches, Grinders, Centrifugal Pumps and some conveyors
Full Load Speed:930rpm, Full Load Current@230V:8.3amps
Shaft size:24mm, Weight:17kg
Non Standard Frame Size
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1700
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 2Pole 1Phase M71 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2730rpm, Full Load Current@230V:3.4amps
Shaft size:14mm, Weight:7kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1701
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 2Pole 1Phase M71 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2730rpm, Full Load Current@230V:4.3amps
Shaft size:14mm, Weight:8.3kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1702
supplier
Orange 1
specs link
Click here

0.75Kw (1HP) 2Pole 1Phase M80 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2770rpm, Full Load Current@230V:5.1amps
Shaft size:19mm, Weight:10kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1703
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 2Pole 1Phase M80 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2710rpm, Full Load Current@230V:7amps
Shaft size:19mm, Weight:11.8kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1704
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 2Pole 1Phase M80 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2700rpm, Full Load Current@230V:9.8amps
Shaft size:19mm, Weight:12.5kg
Non Standard Frame Size
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1705
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 2Pole 1Phase M90S CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2750rpm, Full Load Current@230V:9amps
Shaft size:24mm, Weight:15kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1707
supplier
Orange 1
specs link
Click here

2.2Kw (3HP) 2Pole 1Phase M90L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2740rpm, Full Load Current@230V:13.4amps
Shaft size24mm, Weight:16.8kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1708
supplier
Orange 1
specs link
Click here

2.5Kw (3 1/3HP) 2Pole 1Phase M100L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:2850rpm, Full Load Current@230V:14.7amps
Shaft size28mm, Weight:22.4kg
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1709
supplier
Orange 1
specs link
Click here

3Kw (4HP) 2Pole 1Phase M100 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Shaft size28mm
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1716
supplier
Orange 1
specs link
Click here

0.18Kw (1/4HP) 4Pole 1Phase M63 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Shaft size:11mm
Drive end bearing 6202 CM ZZ
Non-drive end bearing 6202 CM ZZ

Back to Top

sku
G1718
supplier
Orange 1
specs link
Click here

0.25Kw (1/3HP) 4Pole 1Phase M71 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Shaft size:14mm
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1720
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 4Pole 1Phase M71 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1350rpm, Full Load Current@230V:3amps
Shaft size:14mm, Weight:8kg
Drive end bearing 6203 CM ZZ
Non-drive end bearing 6203 CM ZZ

Back to Top

sku
G1721
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 4Pole 1Phase M80 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1360rpm, Full Load Current@230V:3.7amps
Shaft size:19mm, Weight:9kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1722
supplier
Orange 1
specs link
Click here

0.75Kw (1HP) 4Pole 1Phase M80 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1400rpm, Full Load Current@230V:5.3amps
Shaft size:19mm, Weight:10.4kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1723
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 4Pole 1Phase M90S CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1380rpm, Full Load Current@230V:6.7amps
Shaft size:24mm, Weight:13.4kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1724
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 4Pole 1Phase M90L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1360rpm, Full Load Current@230V:9.3amps
Shaft size24mm, Weight:16.2kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1725
supplier
Orange 1
specs link
Click here

1.8Kw (2 1/2HP) 4Pole 1Phase M90L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1360rpm, Full Load Current@230V:12.1amps
Shaft size24mm, Weight:18.2kg
Drive end bearing 6205CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1727
supplier
Orange 1
specs link
Click here

2.2Kw (3HP) 4Pole 1Phase M100L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:1350rpm, Full Load Current@230V:13amps
Shaft size28mm, Weight:24kg
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1740
supplier
Orange 1
specs link
Click here

0.37Kw (1/2HP) 6Pole 1Phase M80 CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:920rpm, Full Load Current@230V:3amps
Shaft size:19mm, Weight:10kg
Drive end bearing 6204 CM ZZ
Non-drive end bearing 6204 CM ZZ

Back to Top

sku
G1741
supplier
Orange 1
specs link
Click here

0.55Kw (3/4HP) 6Pole 1Phase M90S CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:910rpm, Full Load Current@230V:4.3amps
Shaft size:24mm, Weight:13kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1742
supplier
Orange 1
specs link
Click here

0.75Kw (1HP) 6Pole 1Phase M90L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:945rpm, Full Load Current@230V:5.8amps
Shaft size:24mm, Weight:14.9kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1743
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 6Pole 1Phase M90L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:930rpm, Full Load Current@230V:8.3amps
Non Standard Frame Size
Shaft size:24mm, Weight:17kg
Drive end bearing 6205 CM ZZ
Non-drive end bearing 6205 CM ZZ

Back to Top

sku
G1744
supplier
Orange 1
specs link
Click here

1.1Kw (1 1/2HP) 6Pole 1Phase M100L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:935rpm, Full Load Current@230V:8.1amps
Shaft size:28mm, Weight:19kg
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
G1755
supplier
Orange 1
specs link
Click here

1.5Kw (2HP) 6Pole 1Phase M100L CSCR Aluminium

A complete range of Italian manufactured single phase IEC metric frame motors. Ranging from 0.09kw to 3kw. All mounting arrangement available
These motors are particularly suited to heavy load or high toque starting applications. Suitable for Air Compressors, Conveyors, Augers, Elevators Winches, Lifts and Positive Displacement Pumps.
Motors are fitted with a thermal reset overload.
Full Load Speed:930rpm, Full Load Current@230V:10.6amps
Shaft size:28mm, Weight:21kg
Drive end bearing 6206 C3 ZZ
Non-drive end bearing 6206 C3 ZZ

Back to Top

sku
NDP14037
supplier
BROOK MTL
specs link
Click here

0.37Kw (1/2HP) 4Pole, 1phase, B56, Drip Proof, Cap Start/Induction Run

Single phase, inch dimension (Imperial B56 Frame), rolled steel shell. General purpose motor with standard 5/8” shaft. Flange mount available. Motors are fitted with a thermal re-settable overload.
Shaft Size:5/8" Weight:15kgs

Back to Top

sku
NSP14025
supplier
BROOK MTL
specs link
Click here

0.25Kw (1/3HP) 4Pole, 1phase, B56, Split Phase

Single phase, inch dimension (Imperial B56 Frame), rolled steel shell. General purpose motor with standard 5/8” shaft. Flange mount available. Motors are fitted with a thermal re-settable overload.
Shaft Size:5/8" Weight:15kgs

Back to Top

sku
NTE12170BS
supplier
BROOK MTL
specs link
Click here

BRICK SAW MOTOR 1.7KW 2.5HP 2POLE 1PHASE

A robust replacement heavy duty electric motor especially designed for use with brick and paving cutting machines.

Back to Top

sku
NTE14037
supplier
BROOK MTL
specs link
Click here

0.37Kw (1/2HP) 4Pole, 1phase, B56, Totally Enclosed, Cap Start/Induction Run

Single phase, inch dimension (Imperial B56 Frame), rolled steel shell. General purpose motor with standard 5/8” shaft. Flange mount available. Motors are fitted with a thermal re-settable overload.
Shaft Size:5/8" Weight:15kgs

Back to Top

sku
NTE14075
supplier
BROOK MTL
specs link
Click here

0.75Kw (1HP) 4Pole, 1phase, B56, Totally Enclosed, Cap Start/Induction Run

Single phase, inch dimension (Imperial B56 Frame), rolled steel shell. General purpose motor with standard 5/8” shaft. Flange mount available. Motors are fitted with a thermal re-settable overload.
Shaft Size:5/8" Weight:15kgs

Back to Top

sku
PR1401
supplier
BROOK MTL
specs link
Click here

0.10KW 4POLE 1PHASE (A) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 0.64amps, Shaft Size:14mm, Weight: 3.4kg

Back to Top

sku
PR1602
supplier
BROOK MTL
specs link
Click here

0.15KW 6POLE 1PHASE (B) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 0.95amps, Shaft Size:14mm, Weight: 4.5kg

Back to Top

sku
PR1603
supplier
BROOK MTL
specs link
Click here

0.25KW 6POLE 1PHASE (B) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 1.53amps, Shaft Size:14mm, Weight: 6.9kg

Back to Top

sku
PR1606
supplier
BROOK MTL
specs link
Click here

0.56KW 6POLE 1PHASE (D2) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 3.22amps, Shaft Size:24mm, Weight: 13kg

Back to Top

sku
PR1802
supplier
BROOK MTL
specs link
Click here

0.15KW 8POLE 1PHASE (B) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 1.20amps, Shaft Size:14mm, Weight: 6.3kg

Back to Top

sku
PR1803
supplier
BROOK MTL
specs link
Click here

0.18KW 8POLE 1PHASE (B) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 1.1amps, Shaft Size:14mm, Weight: 6.5kg

Back to Top

sku
PR1805
supplier
BROOK MTL
specs link
Click here

0.37KW 8POLE 1PHASE (C) FRAME TEAOM PEARL

Pearl motors are a single phase range of ventilating motor used extensively for air movement in small commercial businesses or restaurants.
The pad mount feature of these motors, make them particularly suitable for axial or tube type fans. Motors are speed controllable in a three wire configuration and are low noise.
We recommend that the run capacitor be mounted on the outside of the fan casing where exhaust temperatures are over 40oC. Refer to ‘Speed Control of Fans’ in the ‘INFO/FAQ’ section.
Full Load Current @240V: 1.8amps, Shaft Size:14mm, Weight: 6.9kg

Back to Top

sku
QW1703
supplier
QW
specs link
Click here

1.1Kw (1 1/2HP) 2Pole 1Phase H80 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
QW1705
supplier
QW
specs link
Click here

1.5Kw (2HP) 2Pole 1Phase H90 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
QW1707
supplier
QW
specs link
Click here

2.2Kw (3HP) 2Pole 1Phase H100 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
QW1722
supplier
QW
specs link
Click here

0.75Kw (1HP) 4Pole 1Phase H80 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
QW1723
supplier
QW
specs link
Click here

1.1Kw (1 1/2HP) 4Pole 1Phase H90 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
QW1724
supplier
QW
specs link
Click here

1.5Kw (2HP) 4Pole 1Phase H90 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
QW1727
supplier
QW
specs link
Click here

2.2Kw (3HP) 4Pole 1Phase H100 CSCR Aluminium

The QW Series of general purpose single phase electric motor, is a competitive choice when it comes to single phase applications on 220V 50Htz supply. Designed for high torque starting these motors are suitable for loads such as compressors, conveyors, mulching and grain milling machines, and augers. Motors come complete with leads and plugs, and flange mounting options are available.
Special dimension and specification machines can be supplied on application.

Back to Top

sku
SM180-3
supplier
BROOK MTL
specs link
Click here

New Zealand Spit Motor (Rotisserie) Single Phase

This Spit Motor is suitable for industrial type rotisseries. The units use 230V AC domestic supply and are capable of rotating a balanced 40kg load.
Use of a R.C.D. protection device is advised.

Back to Top