sku
DL90TYD-M-GEARED
supplier
ZWDM
specs link
Click here

90TYD-M-SLOW MOTION GEARED PM SYNCHRONOUS MOTOR

The D.L. geared range of “slow motion” in line gearboxes are designed for light industrial geared drives, with a maximum output torque of 50Nm and speed range of 0.5 to 20 rpm. A flexible range of both AC and DC voltages is available. See spec sheet.

Back to Top

sku
DL90TYD-S-GEARED
supplier
ZWDM
specs link
Click here

90TYD-S-SLOW MOTION GEARED PM SYNCHRONOUS MOTOR

The D.L. geared range of “slow motion” in line gearboxes are designed for light industrial geared drives, with a maximum output torque of 50Nm and speed range of 0.5 to 20 rpm. A flexible range of both AC and DC voltages is available. See spec sheet.

Back to Top

sku
HILP202A
supplier
EMG
specs link
Click here

202A COAXIAL IN-LINE 2 STAGE – GEARBOX 70Nm

The Hydro-Mec coaxial range of compact in line gearboxes are ideally suited to most industrial applications. Single piece aluminium alloy housing combines light weight with high tensile strength. Precision machined for alignment of bearings and gearing. The peripheral component offers excellent options for input, output and fixing positions. The hardened and ground gears are lubricated for life with a synthetic oil, with an operative range of -15oC to +130oC. Output speed range between 407 - 22.6 rpm.

Back to Top

sku
HILP402A
supplier
EMG
specs link
Click here

402A COAXIAL IN-LINE 2 STAGE – GEARBOX 150Nm

The Hydro-Mec coaxial range of compact in line gearboxes are ideally suited to most industrial applications. Single piece aluminium alloy housing combines light weight with high tensile strength. Precision machined for alignment of bearings and gearing. The peripheral component offers excellent options for input, output and fixing positions. The hardened and ground gears are lubricated for life with a synthetic oil, with an operative range of -15oC to +130oC. Output speed range between 398 - 22.6 rpm.

Back to Top

sku
HILP403A
supplier
EMG
specs link
Click here

403A COAXIAL IN-LINE 3 STAGE – GEARBOX 150Nm

The Hydro-Mec coaxial range of compact in line gearboxes are ideally suited to most industrial applications. Single piece aluminium alloy housing combines light weight with high tensile strength. Precision machined for alignment of bearings and gearing. The peripheral component offers excellent options for input, output and fixing positions. The hardened and ground gears are lubricated for life with a synthetic oil, with an operative range of -15oC to +130oC. Output speed range between 36.5 - 6.5 rpm.

Back to Top

sku
HILP502A
supplier
EMG
specs link
Click here

502A COAXIAL IN-LINE 2 STAGE – GEARBOX 320Nm

The Hydro-Mec coaxial range of compact in line gearboxes are ideally suited to most industrial applications. Single piece aluminium alloy housing combines light weight with high tensile strength. Precision machined for alignment of bearings and gearing. The peripheral component offers excellent options for input, output and fixing positions. The hardened and ground gears are lubricated for life with a synthetic oil, with an operative range of -15oC to +130oC. Output speed range between 388 - 23 rpm.

Back to Top

sku
HILP503A
supplier
EMG
specs link
Click here

503A COAXIAL IN-LINE 3 STAGE – GEARBOX 320Nm

The Hydro-Mec coaxial range of compact in line gearboxes are ideally suited to most industrial applications. Single piece aluminium alloy housing combines light weight with high tensile strength. Precision machined for alignment of bearings and gearing. The peripheral component offers excellent options for input, output and fixing positions. The hardened and ground gears are lubricated for life with a synthetic oil, with an operative range of -15oC to +130oC. Output speed range between 35.2 - 2.9 rpm.

Back to Top

sku
HILP602A
supplier
EMG
specs link
Click here

602A COAXIAL IN-LINE 2 STAGE – GEARBOX 460Nm

The Hydro-Mec coaxial range of compact in line gearboxes are ideally suited to most industrial applications. Single piece aluminium alloy housing combines light weight with high tensile strength. Precision machined for alignment of bearings and gearing. The peripheral component offers excellent options for input, output and fixing positions. The hardened and ground gears are lubricated for life with a synthetic oil, with an operative range of -15oC to +130oC. Output speed range between 388 - 23 rpm.

Back to Top

sku
HILP603A
supplier
EMG
specs link
Click here

603A COAXIAL IN-LINE 3 STAGE – GEARBOX 460Nm

The Hydro-Mec coaxial range of compact in line gearboxes are ideally suited to most industrial applications. Single piece aluminium alloy housing combines light weight with high tensile strength. Precision machined for alignment of bearings and gearing. The peripheral component offers excellent options for input, output and fixing positions. The hardened and ground gears are lubricated for life with a synthetic oil, with an operative range of -15oC to +130oC. Output speed range between 35.2 - 3.9 rpm.

Back to Top

sku
HMB030
supplier
EMG
specs link
Click here

030 RIGHTANGLE – GEARBOX 20Nm

The Italian Hydro-Mec range of vent free, single piece alloy housed wormboxes, come in a range from size 030 to 110. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMB045
supplier
EMG
specs link
Click here

045 RIGHTANGLE – GEARBOX 39Nm

The Italian Hydro-Mec range of vent free, single piece alloy housed wormboxes, come in a range from size 030 to 110. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMB050
supplier
EMG
specs link
Click here

050 RIGHTANGLE – GEARBOX 69Nm

The Italian Hydro-Mec range of vent free, single piece alloy housed wormboxes, come in a range from size 030 to 110. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMB063
supplier
EMG
specs link
Click here

063 RIGHTANGLE – GEARBOX 140Nm

The Italian Hydro-Mec range of vent free, single piece alloy housed wormboxes, come in a range from size 030 to 110. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMB063A
supplier
EMG
specs link
Click here

063A RIGHTANGLE – GEARBOX 180Nm

The Italian Hydro-Mec range of vent free, single piece alloy housed wormboxes, come in a range from size 030 to 110. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMB085
supplier
EMG
specs link
Click here

085 RIGHTANGLE – GEARBOX 330Nm

The Italian Hydro-Mec range of vent free, single piece alloy housed wormboxes, come in a range from size 030 to 110. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMB110
supplier
EMG
specs link
Click here

110 RIGHTANGLE – GEARBOX 620Nm

The Italian Hydro-Mec range of vent free, single piece alloy housed wormboxes, come in a range from size 030 to 110. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ030
supplier
EMG
specs link
Click here

Q30 SQUARE – WORM GEARBOX 20Nm

The Italian Hydro-Mec range of vent free, square, single piece alloy housed wormboxes, come in a range from size Q30 to Q13. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ045
supplier
EMG
specs link
Click here

Q45 SQUARE – WORM GEARBOX 39Nm

The Italian Hydro-Mec range of vent free, square, single piece alloy housed wormboxes, come in a range from size Q30 to Q13. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ050
supplier
EMG
specs link
Click here

Q50 SQUARE – WORM GEARBOX 69Nm

The Italian Hydro-Mec range of vent free, square, single piece alloy housed wormboxes, come in a range from size Q30 to Q13. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ063
supplier
EMG
specs link
Click here

Q63 SQUARE – WORM GEARBOX 140Nm

The Italian Hydro-Mec range of vent free, square, single piece alloy housed wormboxes, come in a range from size Q30 to Q13. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ075
supplier
EMG
specs link
Click here

Q75 SQUARE – WORM GEARBOX 270Nm

The Italian Hydro-Mec range of vent free, square, single piece alloy housed wormboxes, come in a range from size 30 to 63. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ085
supplier
EMG
specs link
Click here

Q85 SQUARE – WORM GEARBOX 330Nm

The Italian Hydro-Mec Q85 is a square,cast iron wormbox. It incorporates a bronze alloy worm gear , centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ110
supplier
EMG
specs link
Click here

Q11 SQUARE – WORM GEARBOX 620Nm

The Italian Hydro-Mec Q11 is a square,cast iron wormbox. It incorporates a bronze alloy worm gear , centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ130
supplier
EMG
specs link
Click here

Q13 SQUARE – WORM GEARBOX 1050Nm

The Italian Hydro-Mec Q13 is a square,cast iron wormbox. It incorporates a bronze alloy worm gear , centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top