sku
HMQ030
supplier
EMG
specs link
Click here

Q30 SQUARE – WORM GEARBOX 20Nm

The Italian Hydro-Mec range of vent free, square, single piece alloy housed wormboxes, come in a range from size Q30 to Q13. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ045
supplier
EMG
specs link
Click here

Q45 SQUARE – WORM GEARBOX 39Nm

The Italian Hydro-Mec range of vent free, square, single piece alloy housed wormboxes, come in a range from size Q30 to Q13. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ050
supplier
EMG
specs link
Click here

Q50 SQUARE – WORM GEARBOX 69Nm

The Italian Hydro-Mec range of vent free, square, single piece alloy housed wormboxes, come in a range from size Q30 to Q13. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ063
supplier
EMG
specs link
Click here

Q63 SQUARE – WORM GEARBOX 140Nm

The Italian Hydro-Mec range of vent free, square, single piece alloy housed wormboxes, come in a range from size Q30 to Q13. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ075
supplier
EMG
specs link
Click here

Q75 SQUARE – WORM GEARBOX 270Nm

The Italian Hydro-Mec range of vent free, square, single piece alloy housed wormboxes, come in a range from size 30 to 63. The bronze alloy worm gear is centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ085
supplier
EMG
specs link
Click here

Q85 SQUARE – WORM GEARBOX 330Nm

The Italian Hydro-Mec Q85 is a square,cast iron wormbox. It incorporates a bronze alloy worm gear , centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ110
supplier
EMG
specs link
Click here

Q11 SQUARE – WORM GEARBOX 620Nm

The Italian Hydro-Mec Q11 is a square,cast iron wormbox. It incorporates a bronze alloy worm gear , centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top

sku
HMQ130
supplier
EMG
specs link
Click here

Q13 SQUARE – WORM GEARBOX 1050Nm

The Italian Hydro-Mec Q13 is a square,cast iron wormbox. It incorporates a bronze alloy worm gear , centrifugally cast onto an iron hub for maximum strength whilst the high helix angle worm is case hardened (Rc 58-60). The detachable input flange is modular to accommodate IEC dimensioned flanges. Generous sized ball bearings are used throughout in conjunction with high temperature Nitrile® seals.

Back to Top